Home Page link

Residential Stairlifts

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Residential Stairlifts TroutFisher 07-07-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by TroutFisher on July 7, 2007, 10:56 am
This is for anyone who has one or researched installing
one.......Need
feedback.

What is the average cost for a good quality stairlift to be installed
in
an existing home? A simple 9 or 10 feet vertical run, with no turns.
I'm thinking 3 to 5 thousand but I could be way off.

Are they worth the money? Maintenance requirements? Operational
reliability?

thanks........


Posted by dpb on July 7, 2007, 11:09 am
TroutFisher wrote:
> This is for anyone who has one or researched installing
> one.......Need
> feedback.
>
> What is the average cost for a good quality stairlift to be installed
> in
> an existing home? A simple 9 or 10 feet vertical run, with no turns.
> I'm thinking 3 to 5 thousand but I could be way off.
>
> Are they worth the money? Maintenance requirements? Operational
> reliability?

That about covers the mid-range. You can go 2-3x up, maybe 3/4x down.

They're worth it if they're needed. Reliability is in this case in what
few I've seen/been around (maybe half-dozen(?)) seems reasonably good
but I'd say it definitely is related to initial cost (until you get to
the really high-end models that have a tremendous amount of cosmetics
built into them like the custom matching woodwork, etc., ...

--

Posted by hallerb@aol.com on July 7, 2007, 8:33 pm
> TroutFisher wrote:
> > This is for anyone who has one or researched installing
> > one.......Need
> > feedback.
>
> > What is the average cost for a good quality stairlift to be installed
> > in
> > an existing home? A simple 9 or 10 feet vertical run, with no turns.
> > I'm thinking 3 to 5 thousand but I could be way off.
>
> > Are they worth the money? Maintenance requirements? Operational
> > reliability?
>
> That about covers the mid-range. You can go 2-3x up, maybe 3/4x down.
>
> They're worth it if they're needed. Reliability is in this case in what
> few I've seen/been around (maybe half-dozen(?)) seems reasonably good
> but I'd say it definitely is related to initial cost (until you get to
> the really high-end models that have a tremendous amount of cosmetics
> built into them like the custom matching woodwork, etc., ...
>
> --

user must be physically and mentall competent enough to use device.

power failures must be prepared for. the person is stuck half way down
now what.

my mom was having major surgery, her surgeon didnt think she should be
using a stairlift. bath was on second floor

i converted the dining room into a bed bathroom with toilet sink and
cheap shower. my mom did well initially but died within 6 months.

i removed the bath stuff and patched the floor. it was a quick dirty
cheap fix for a big problem at the time


Posted by dpb on July 8, 2007, 9:20 am
hallerb@aol.com wrote:
>> TroutFisher wrote:
>>> This is for anyone who has one or researched installing
>>> one.......Need
>>> feedback.
>>> What is the average cost for a good quality stairlift to be installed
>>> in
>>> an existing home? A simple 9 or 10 feet vertical run, with no turns.
>>> I'm thinking 3 to 5 thousand but I could be way off.
>>> Are they worth the money? Maintenance requirements? Operational
>>> reliability?
>> That about covers the mid-range. You can go 2-3x up, maybe 3/4x down.
>>
>> They're worth it if they're needed. Reliability is in this case in what
>> few I've seen/been around (maybe half-dozen(?)) seems reasonably good
>> but I'd say it definitely is related to initial cost (until you get to
>> the really high-end models that have a tremendous amount of cosmetics
>> built into them like the custom matching woodwork, etc., ...
>>
>> --
>
> user must be physically and mentall competent enough to use device.
>
> power failures must be prepared for. the person is stuck half way down
> now what.
...

I'm sure there may be some that have only line power, but all the ones I
have actually seen installed actually operate off battery pack which is
recharged from line for precisely that reason...

The reliability problems of these (that have had problems) have been
mostly things like the interlocks on the guards, limit switch(es)
adjustment, etc., ... Higher end units have had fewer issues
im(somewhat limited)e.

--



Posted by dpb on July 8, 2007, 9:23 am
hallerb@aol.com wrote:
>> TroutFisher wrote:
>>> This is for anyone who has one or researched installing
>>> one.......Need
...

> user must be physically and mentall competent enough to use device.

But remember the liftee doesn't necessarily have to be the operator--in
a live-in care-provider situation, for example.

--



Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Residential Electrical May 7, 2006, 9:52 pm
Residential "slush" machine? August 5, 2005, 9:20 am
residential electrical question December 30, 2005, 5:02 pm
Residential service specs March 25, 2006, 5:09 pm
residential window heat May 20, 2006, 12:39 am
residential power meters January 10, 2007, 3:43 pm
2003 International Residential Code November 25, 2005, 4:49 pm
Residential Propane Gauges- How well do they work? January 22, 2006, 7:40 am
residential versus commercial grade February 20, 2006, 8:56 pm
Residential Electrical Grounding - 2005 NEC August 23, 2006, 9:59 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap