Home Page link

Rubber flooring

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Rubber flooring Joseph Meehan 09-17-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Joseph Meehan on September 17, 2006, 2:07 pm
I am looking into residential rubber flooring. I hope to find someone
with some experience with this type of product in residential applications.

The intended use will be a bathroom. Any comments??? So far I have
found a little information about Gilbert ECO.

--
Joseph Meehan

Dia duit



Radiant Heat 468x60
Posted by Mark D on September 17, 2006, 2:48 pm
Hi, You mean an anti-slip type Rubber flooring such as Nora Flooring?

Yes, I have experience with the Nora Brand Anti-Slip Tile, as I laid
this type, and brand of Tile for probably 12-14 years.

Rubber flooring is first of all not cheap (As I'm sure you already know)
Nora brand flooring is actually supposed to be laid with a gap between
sheets, grooved with a U-shaped Razor Seam Grooving Tool, and all seams
caulked with a two part Epoxy Caulk,

The Caulk is nasty stuff, and can be messy if not well experienced with
this material, and the procedures for applying. Not exactly what I would
personally want in a home.

I would imagine other brands of Rubber Flooring would use a similar
installation process, but of course I could be wrong about this?

I have laid Nora seam to seam tightly with good results, but the reason
for gapping the seams, is for expansion, and contraction. Naturally in a
home, the changes of temperature, and temperature extremes would not be
as great as in commercial applications.

Buckling, or Bubbling will-can occur over time by not allowing for
expansion-contraction.

Depending on the Subfloor material, and whether it is a porous material,
or not will dictate the type of adhesive used.

For Porous subfloors a more conventional type Adhesive will be used,
(usually the manufacturer's own brand must be used for proper results)
and for non-porous surfaces (Such as a Plymetal Subfoor), Adhesives such
as a two part Epoxy, or Contact Cement is then used.

In all actuality, while the rubber floors are durable, the anti slip
types can be somwhat slippery when wet, and I would imagine in bare feet
one could just as easily slip with Rubber flooring like any other type.

I don't know if my post has answered any of your questions, but I hope
they have.
Mark


Posted by Joseph Meehan on September 17, 2006, 7:44 pm
> Hi, You mean an anti-slip type Rubber flooring such as Nora Flooring?
>
> Yes, I have experience with the Nora Brand Anti-Slip Tile, as I laid
> this type, and brand of Tile for probably 12-14 years.
>
> Rubber flooring is first of all not cheap (As I'm sure you already know)
> Nora brand flooring is actually supposed to be laid with a gap between
> sheets, grooved with a U-shaped Razor Seam Grooving Tool, and all seams
> caulked with a two part Epoxy Caulk,
>
> The Caulk is nasty stuff, and can be messy if not well experienced with
> this material, and the procedures for applying. Not exactly what I would
> personally want in a home.
>
> I would imagine other brands of Rubber Flooring would use a similar
> installation process, but of course I could be wrong about this?
>
> I have laid Nora seam to seam tightly with good results, but the reason
> for gapping the seams, is for expansion, and contraction. Naturally in a
> home, the changes of temperature, and temperature extremes would not be
> as great as in commercial applications.
>
> Buckling, or Bubbling will-can occur over time by not allowing for
> expansion-contraction.
>
> Depending on the Subfloor material, and whether it is a porous material,
> or not will dictate the type of adhesive used.
>
> For Porous subfloors a more conventional type Adhesive will be used,
> (usually the manufacturer's own brand must be used for proper results)
> and for non-porous surfaces (Such as a Plymetal Subfoor), Adhesives such
> as a two part Epoxy, or Contact Cement is then used.
>
> In all actuality, while the rubber floors are durable, the anti slip
> types can be somwhat slippery when wet, and I would imagine in bare feet
> one could just as easily slip with Rubber flooring like any other type.
>
> I don't know if my post has answered any of your questions, but I hope
> they have.
> Mark
>

Thanks for the response. Nora is not the specific product I was
considering as it is identified as primary a commercial product and they
appear to strongly discourage residential use. However your response has
been very helpful and did bring up some considerations I have not thought
of.



Posted by on September 18, 2006, 6:33 am
my father-in-law got some from the supplier for the hospital he worked
at. wonderful stuff, alot fewer broken plates and glasses in thier
kitchen now.

Empressess #124457


The best Games


<a href=http://www.gamestotal.com/>Multiplayer Online Games</a> <a
href=http://www.gamestotal.com/>Strategy Games</a><br><a
href=http://uc.gamestotal.com/>Unification Wars</a> - <a
href=http://uc.gamestotal.com/>Massive Multiplayer Online
Games</a><br><a href=http://gc.gamestotal.com/>Galactic Conquest</a> -
<a href=http://gc.gamestotal.com/>Strategy Games</a><br><a
href=http://www.stephenyong.com/runescape.htm>Runescape</a><br><a
href=http://www.stephenyong.com/kingsofchaos.htm>Kings of chaos</a><br>



Joseph Meehan wrote:
> I am looking into residential rubber flooring. I hope to find someone
> with some experience with this type of product in residential applications.
>
> The intended use will be a bathroom. Any comments??? So far I have
> found a little information about Gilbert ECO.
>
> --
> Joseph Meehan
>
> Dia duit


Similar ThreadsPosted
Rubber flooring October 4, 2006, 9:00 pm
Carpet Pads: Waffle Rubber Pad or Slab Rubber Pad? November 19, 2005, 11:15 am
Need Flooring Help or Just want to Talk to other Flooring Professionals June 22, 2008, 9:58 am
O.T. but help please rubber hose ?'s September 10, 2005, 1:10 am
Gluing rubber to glass December 26, 2005, 8:11 pm
Re: OT: How to remove silicone rubber April 3, 2006, 12:14 pm
Rubber Padded Mats? October 2, 2006, 11:40 pm
Fixing a rubber roof (help!) November 14, 2006, 8:07 pm
My hands get wet using my rubber gloves March 29, 2007, 10:45 am
Rubber Bumper for Shed November 5, 2007, 11:12 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap