|
Posted by on January 27, 2008, 9:00 pm
I was wondering the same thing... Does anyone have any information on
the Russo Glass-View Wood Burning stove? I bought one from someone
and nobody knows where to order parts or where to get information on
this stove. The stove was manufactured in the 70's but it looks new!
I need a blower for the stove. Any help on locating information on
this brand of stove??
Ron Samuel
rlsamuel@gmail.com
01-9135-076aba27775f@m34g2000hsb.googlegroups.com...
>
> > Does anyone know anything abouy the Russo Glass-View Wood Burning
> > Stove. =A0I bought a house that had one, in the back it has a blower,
> > not sure if the blower works, I plugged it in and nothing, =A0I made
> > sure the Flu was open and in the middle postion, then tested it with
> > some starter wood, it probably has not been use in a few years,
> > The room got a little smokey
> > So my question is and yes I am stupid when it comes to this, but I
> > dont want to kill everyon in my house so anyone have any ideas on how
> > to use the thing
>
> If unsure of its history, I suggest having a certified chimney sweep do a
> safety inspection. =A0Look on this industry site for a list:http://www.CSI=
A.org.
>
> The blower may have a snap switch (thermostat) so it only comes on when up=
> to temperature, so it does not blow cold air.
>
> Smoke into the room could be a flue that needs to be preheated, or a clogg=
ed
> rain cap mesh.
> --
> John Galbreath Jr.www.FireLogs.com
> Irondale, Alabama
> 888.321.Logs
|