|
Posted by N8N on December 17, 2006, 1:11 pm
JGolan wrote:
> plain steel wool rubbed in the same direction as the grain of the sink.
> If a really deep sratch use a wire wheel mounted on an electric drill
> Jim Jacobs wrote:
> > Anyone have any recommendations on how to get scratches out of a stainless
> > steel sink?
> >
> > Thanks for any help.
> >
> > Jim
Scotchbrite pads (the stuff sold at your FLAPS, not the grocery store)
will work too for severe scratches. Make sure to go with the grain
otherwise your repair will be obvious.
nate
|