Home Page link

Semi-transparent stain on pressure-treated green board

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Semi-transparent stain on pressure-treated green board aspasia 06-19-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on June 26, 2007, 8:34 pm
On Fri, 22 Jun 2007 10:47:13 -0400, curmudgeon

>Generally speaking, it is not wise to put solid stain on
>horizontal/walking surfaces.

I want to be sure you understand what the walking surface is in this
case. It's Trex, which is a composite product made of wood and
recycled plastics.

<www.trex.com>

Would your comments apply to this product, as well as to ordinary
wood?

> It's film is softer than paint and will show a walking path within
>months. Even dogs
>toenails will wear a path in a short period of time.
>On vertical surfaces solid stain over something like T-111 siding will
>last for 15 or 20 years.
>Semi-transparent stain will sink into the wood

We're not talking about "regular" wood, but about the composite
product sold under various names, Weatherbest, etc. This one is Trex.

I need to learn the distinction between the way between the way solid
stain wears on wood, as opposed to on Trex.

I have time to deal with this, as Trex recommends the steps "fade" for
12-16 weeks before painting/staining, but want to Do the Right Thing
when the time comes.

Anybody familiar with the effect of solid stain on Trex steps?

TIA

Aspasia

a little better and will tend to fade more than "wear". You should
be fine with multiple coats,
>but do no more than two.
>BTW, if solid stain "peels", it was definitely applied wrong.
>
>> I was under the impression that the second coat might not stick to the
>> first coat, and I might need to sand the first coat before I could
>> apply the second coat. I am glad to hear that this is not the case.
>>
>> Great. This means I can apply several coats of the semi-transparent
>> stain next time when I stain the deck. I choose semi-transparent
>> stain _not_ for allowing the base color of the wood to show, I prefer
>> to use semi-transparent stain because I am under the impression that
>> semi-transparent stain tends to wear gradually, instead of peeling off
>> in large pieces like the solid paint may do. I am not sure if the
>> semi-transparent stain will still wear gradually if I apply multiple
>> coats instead of just one coat. Hopefully, this will be the case.
>>
>> Jay Chan
>>


Posted by on June 26, 2007, 8:35 pm

>aspasia wrote:
>> Contractor put Behr semi-transparent stain on pressure-treated
>> uprights and risers (green board) of my new side steps.
>
>Little late now, but if by "green board" you mean brand new material
>before it has had a chance to dry, it would have been best to wait...

Not relevant. This is pressure-treated wood which, AFAIK, does not
need to dry.

Aspasia
>
>> Can instructions say to put only one coat.
>>
>> (Does not say that about solid stain for Trex steps).
>>
>> Why the difference.
>
>Multiple coats of semi-transparent --> solid...
>
>The presumption is if you used a semi-transparent stain you don't want
>the finished surface to look like a solid stain or paint had been used.


Page 2 of 2       << first < 1 2
Similar ThreadsPosted
Water- or Oil-Based Semitransparent Stain For PT Deck? September 28, 2005, 12:14 pm
Proper way to mud seam between Backer board and Green Board? February 11, 2006, 11:36 am
Installing green board February 16, 2005, 6:37 am
DensArmor or Green Board June 12, 2006, 4:17 pm
Green board gypsum as exterior sheathing January 24, 2006, 10:15 am
Deck stain - Behr Semi-Transparent Stain with Nanoguard July 27, 2007, 10:38 am
Hardibacker board vs Cement board for Garage/Mudroom shower. September 13, 2006, 2:09 pm
Board-on-board fencing question June 5, 2007, 11:53 pm
Think Green ! December 17, 2006, 11:17 pm
Green Copper December 17, 2006, 4:35 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap