|
Posted by Howard on January 15, 2007, 10:58 pm
Actually they seem to have thought out the idea pretty well. Usually
they use two pumps with circuitry to alternate them to equalize wear.
That way there is a backup in place, tested, ready to go if one pump
fails. They are fed by utility electric power and usually have the
generator as backup. Add a large pit and lots of monitors, alarms and
a maintenance force and they work well. Ever heard of sewer system
failure?
>
> > Generally sewage is routed to the low point of the development. If
> > that is below the level of mainline to the sewage plant then a pump
> > station is developed. The output of the pump station is under
> > pressure. Most of the pump station is below grade. You can sometimes
> > spot one by looking for a concrete pad, surrounded by a fence. On the
> > pad is a watertight electrical box and usually a backup generator. The
> > watertight box is the control for the multiple pumps located below
> > ground in the pit.Hmm, thanks, I'll have to take a closer look next time I'm
walking around
> the neighborhood. Seems like a pretty tenuous solution given the
> consequences if it fails but what else can you do?
>
>
>
> >> What is done when a house's sewer line is below the level of the main
> >> sewer
> >> line? I didn't think those lines were pressurized, so how does a house's
> >> sewage system work in those conditions?
>
> >> For instance in my neighborhood half the houses are about 20 feet below
> >> my
> >> street. In this instace would the city install a pumping unit for those
> >> houses or would they route the sewer line towards those houses and out?
> >> I
> >> guess it depends on the situation, but still, if the waste treatment
> >> plant
> >> is above your house (vertically that is) does that mean your sewage is
> >> pumped to that plant or is sewage all gravity fed?
>
> >> Always wondered about that, I never hear pumps running under the street
> >> and
> >> I didn't think lines were pressurized anyway.
|