|
Posted by Harry K on July 21, 2005, 9:03 am
summitlt@gmail.com wrote:
> Ok, today my mom bought one of those blow up pools and felt the need to
> blow it up. She filled it halfway up and we all took showers an the
> regular things. After filling the pool, the well went low. you can
> usually tell this because the water turns brown (I assume from sediment
> from the bottom of the well)
>
> This is usually no problem, if left alone for a few hours is back and
> working great.
>
> We havent had much rain lately, I guess its catching up.
>
> I was wathcing TV and heard a bang and a scarping. I thought it was a
> accident out front but it was the house going from the well pump into
> the "tank" It blew off of the pump and filled half the basement with
> water. As I went down there I found the pump was abnormally hot. Im
> guessing its been "pumping" air.
>
>
> I havent the slightest idea what happened here. I guess it was caused
> by not having any water. My question is what do I need to do to fix it?
> I pulled the fuse on the pump because it was still running after it
> blew off the hose.
>
> Also, should I check the pressure in the tank, Would that cause any of
> this.
>
> How would I prime the pump?
>
>
> I dont know what to do at this point.
>
> Sorry for the bad grammer, spelling and whatever else. Its 12:08 AM,
> ive been up for 20 hours now, im tired, have no water.
First things first. You have no water. Get it back then worry about
other problems. The pump was running when you shut it off. It will (or
should) run again when you turn it on. I am assuming the pump is on
top of the well.
Prime the pump. You will find a plug somewhere on the pump housing,
pull it and pour water in until it fills up. Wait for any air bubbles
to work their way out. This may take a few minutes and it may help to
manually turn the pump (if it can be done). Once the pump is full with
no more bubbles, replace plug and turn on the pump.
Okay, now you have pump that is running and with a great deal of luck
it will pump water. If so, shut it off and reconnect the plumbing.
If it doesn't pump (most likely), the pump is fried. The seals are
designed to be run wet. Running one dry as apparently happened ruins
the seals. Solution is to get a new pump. At the cost of repair, etc.
I don't think it is worth it to overhaul one that has gone through what
happened.
Once you get the water back in operation, get back to us with any
further problems.
Harry K
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap