Home Page link

Should I reglaze or replace my windows?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 4 of 4       << first < 1 2 3 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Should I reglaze or replace my windows? Joe 06-17-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Joe on June 17, 2008, 11:44 pm

>
> Hi,
> Where do you live? Windows and wall, ceiling(attic) insulation is
> important for energy onservation.

I'm in Connecticut in a Cape and the 2nd floor is always colder than
the first which tells me that my primary expense should be
reinsulating the attic - which is a job in itself for a Cape because I
need to rip up the ceiling to do it. Just don't know if I have the
budget to do that, replace the windows and blow in wall insulation. So
I think I'm going to have to do 2 out of 3.

Plumbing 468x60
Posted by David Nebenzahl on June 17, 2008, 9:18 pm
On 6/17/2008 11:21 AM Joe spake thus:

> I have a 50 year old house and 50 year old windows. This winter I
> noticed that the original glazing had been chipping off and the only
> thing holding some of the panes in place was paint so I resolved to
> reglaze the windows this spring (no summer). Should I just replace
> them? They are pretty air-tight and I did not feel much of a breeze
> coming through them except for the coldest and windiest days of the
> winter and a lot of that I attribute to the old glazing. Each window
> has a storm window but the inside window does feel very cold to the
> touch in the winter so I'm not sure how much they help. I'm trying to
> weight the cost of replacing the windows with the savings that I will
> realize for replacing as opposed to the savings I will get from
> reglazing.

I'm no expert on windows. However, I can offer a data point for you from
a recent job of mine. I replaced a client's windows recently: it was a
Marvin double-hung, double-glazed "Tilt-Pak" window with low-E glass.
The replacement sashes cost $360 ordered from the factory (drop-in
replacments).

If your windows (frames) are OK, I'd seriously consider just re-puttying
them (that's what you mean by "glazing": that word normally refers to
the glass, not the putty).


--
The best argument against democracy is a five-minute
conversation with the average voter.

- Attributed to Winston Churchill

Posted by dpb on June 17, 2008, 10:00 pm
David Nebenzahl wrote:
...
> ... re-puttying
> them (that's what you mean by "glazing": that word normally refers to
> the glass, not the putty).

Actually, that is the alternate meaning, not the primary...

Merriam-Webster

Glazing

Function:
noun
Date:
15th century

1: the action, process, or trade of fitting windows with glass
2 a: glasswork b: glaze
3: transparent material (as glass) used for windows

--

Page 4 of 4       << first < 1 2 3
Similar ThreadsPosted
How to replace aluminum windows with "fin" ?? August 2, 2005, 5:12 pm
replace basement windows February 14, 2008, 8:14 pm
Repair or Replace Corroded Windows? December 19, 2006, 12:54 pm
Anderson windows, difficult to replace glass? July 25, 2005, 11:48 am
Can we replace our windows and retain the marble windowsills? January 18, 2006, 12:45 pm
Need to replace Electric Baseboard Heating Units & Replacement Windows January 27, 2007, 11:29 am
Condensation inside double-paned windows - replace glass or whole window? June 10, 2006, 10:52 am
small 'bulging bay windows' for plants, to replace single hung window,called what? July 19, 2005, 12:57 pm
Are Storm Windows a reasonable approach for newish vinyl windows? October 29, 2005, 10:43 am
Termopane windows or double windows? July 17, 2005, 8:15 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap