|
Posted by hallerb@aol.com on June 24, 2007, 10:40 pm
> My shower drain has a 4" cover plate attached with two 10-24 ss x 3/8"
> machine screws. It is a PVC type drain but has a mild steel insert for
> the two machine screws. The inserts have completely rusted away and I
> have removed the screws. Any way to repair without removing the tile
> and floor and replacing the entire drain? Could I rotate 90deg and
> drill two holes in the pvc and reinstall the screws into the pvc? Or
> drill deeper into the pvc and install 2 new 3/4" long screws in the
> existing position? Any ideas appreciated, Thanks
clean area, apply bathtub caulk in a couple places, to hold the drain
cover in place
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap