|
Posted by Speedy Jim on February 17, 2007, 7:14 pm
nick.a.scott@gmail.com wrote:
> Here is my problem....I needed to extend the shower pipe to install
> the new shower base. I calculated the length needed and got a
> coupling. This is all pvc by the way. I got some pvc cement. I
> just realized i purchased and used cpvc cement (orange) I hope this is
> not a problem.
>
> When I was installing the coupling on the original pipe, it did not
> get fully seated and the ridge in the middle of the coupling is about
> 3/8" or so from the top of the old pipe. now the cement is set and it
> is on for good. Is this a problem or is it fine as it is.....help
> emergency!!!
>
I seriously doubt it will ever leak.
BTW, if you are setting a plastic/fiberglass base,
make sure it is well-supported underneath so that
there will never be any force exerted on the drain
fitting or on the new pipe.
Jim
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap