|
Posted by on September 3, 2008, 6:33 am
wrote:
>Tony Hwang wrote:
>> HeyBub wrote:
>>> Aaron Fude wrote:
>>>> Hi,
>>>>
>>>> A plumber told me that it's a good idea to shut off water from the
>>>> washer when it's not in use because the flexible lines aren't rated
>>>> to continuous pressure.
>>>
>>> Well, they ARE rated for continuous pressure, but do break. So
>>> shutting off the water is a fail-safe idea. Special valves are
>>> available for just that purpose - to make it easy to turn off the
>>> water.
>>>> A. Is that true?
>>>> B. Does the same apply to the gas line for the dryer?
>>>
>>> It does NOT apply to the dryer's gas line (unless you're using the
>>> push-on rubber hoses that have been outlawed since about 1950).
>>>
>>>
>>>
>> Hi,
>> One thought, if you keep turing water on/off wouldn't it cause
>> premature failure of hose by repeated expanding/shrinking cycles?
>
>Don't think so. The water in the hose will retain the pressure - unless it
>leaks, then you have a different problem.
>
Even with titanium hoses equipped with laser carved diamond fittings,
you still have to consider that the inner plumbing and valves of the
washer itself can fail. Shut the water off. Really.
|