Home Page link

Source of reasonably priced cabinet knobs and pulls?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 3       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Source of reasonably priced cabinet knobs and pulls? Joy 04-29-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Joy on April 29, 2008, 10:19 pm
I would like to replace the knobs and pulls on my cabinets and drawers but
the local hardware stores seem SO expensive. $4.00 for one brass pull?
Sheesh!

I would like decent hardware but am not sure what makes one material
better than another and would appreciate some advice and comments.

Also, does anyone know of a reliable place with a decent selection I could
order on the web that would be cheaper than the big chain hardware stores?

Thanks so much!

Joy

Posted by Tony Hwang on April 29, 2008, 10:22 pm
Joy wrote:
> I would like to replace the knobs and pulls on my cabinets and drawers
> but the local hardware stores seem SO expensive. $4.00 for one brass
> pull? Sheesh!
>
> I would like decent hardware but am not sure what makes one material
> better than another and would appreciate some advice and comments.
>
> Also, does anyone know of a reliable place with a decent selection I
> could order on the web that would be cheaper than the big chain
> hardware stores?
>
> Thanks so much!
>
> Joy
Hi,
4.00 is epxpensive? Let's hear what should it cost then?
My gosh!

Posted by Una on April 29, 2008, 10:43 pm
For low cost brass, you might get lucky in a ReStore (Habitat for
Humanity thrift shop) or on a local freecycle group. Or use some
other, less expensive material.

        Una


Posted by Paul Franklin on April 29, 2008, 11:11 pm

>I would like to replace the knobs and pulls on my cabinets and drawers but
>the local hardware stores seem SO expensive. $4.00 for one brass pull?
>Sheesh!
>
>I would like decent hardware but am not sure what makes one material
>better than another and would appreciate some advice and comments.
>
>Also, does anyone know of a reliable place with a decent selection I could
>order on the web that would be cheaper than the big chain hardware stores?
>
>Thanks so much!
>
>Joy



You can try www.woodworkershardware.com

They have some good (and expensive) stuff, but also have some
economically priced lines. But if you have your heart set on solid
brass, $4 is going to seem like a bargain.

HTH,

Paul Franklin



Posted by dadiOH on April 30, 2008, 5:48 am
Paul Franklin wrote:
>
>> I would like to replace the knobs and pulls on my cabinets and
>> drawers but the local hardware stores seem SO expensive. $4.00 for
>> one brass pull? Sheesh!
>>
>> I would like decent hardware but am not sure what makes one material
>> better than another and would appreciate some advice and comments.
>>
>> Also, does anyone know of a reliable place with a decent selection I
>> could order on the web that would be cheaper than the big chain
>> hardware stores?
>>
>> Thanks so much!
>>
>> Joy
>
>
>
> You can try www.woodworkershardware.com

An excellent source but (to OP) request a catalog...much easier to flip thru
pages than to browse via web.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico




Page 1 of 3       1 2 3 > last >>
Similar ThreadsPosted
Source for 2 1/2" OC cabinet door pulls? March 16, 2007, 11:51 am
knobs or pulls or both? October 31, 2007, 12:21 am
Source in US for shower knobs? September 2, 2005, 3:25 pm
Kitchen Cabinet Source in the Seattle Area? May 17, 2006, 2:33 pm
Low priced sanders and sandpaper July 7, 2006, 5:42 pm
Is there a reasonably priced water filter... June 27, 2008, 8:19 am
Reasonably priced motion detector/sensor fixtures. September 19, 2007, 12:13 pm
Looking for 2 1/8 inch round door pulls May 19, 2006, 4:32 am
door knobs November 26, 2005, 5:28 pm
Knobs on Chain Saw for ? January 26, 2006, 8:26 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap