If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Chris on July 17, 2006, 10:06 am
I need to smooth out lots of screw holes and various dings in some
plywood shelving. I was going to use wood filler putty but it seems so
hard to work with, not very smooth, kind of dry, crumbly, difficult to
spread. So I notice all these different spackling varieties at the
HD--"crack shot", "vinyl spackling", "fast and final" etc. They all
list wood as an acceptable substance, although I have always thought of
spackling in terms of repairing drywall dings. The spacking seems to
spread on much more easily than the wood filler.
So, what's the best product to use for filling lots of holes in some
wood that will be sanded & painted (oil based paint)? Will the
spacking perform well, or is there some reason to stick with the wood
filler stuff? I was using Elmer's wood filler.
Thanks,
Chris
|
|
Posted by kevin on July 17, 2006, 12:42 pm
Drywall products will be much easier to use (go on quick, sand really
easy, etc.), but they are not very hard/durable. They also shrink alot
(if you have a big or deep dent). If your shelf gets dinged up now, it
will be even worse with spackling. Just add a tiny bit of water to the
wood filler. Or just spit in it. Really. And don't fuss -- just put it
on and sand it when dry.
-Kevin
Chris wrote:
> I need to smooth out lots of screw holes and various dings in some
> plywood shelving. I was going to use wood filler putty but it seems so
> hard to work with, not very smooth, kind of dry, crumbly, difficult to
> spread. So I notice all these different spackling varieties at the
> HD--"crack shot", "vinyl spackling", "fast and final" etc. They all
> list wood as an acceptable substance, although I have always thought of
> spackling in terms of repairing drywall dings. The spacking seems to
> spread on much more easily than the wood filler.
>
> So, what's the best product to use for filling lots of holes in some
> wood that will be sanded & painted (oil based paint)? Will the
> spacking perform well, or is there some reason to stick with the wood
> filler stuff? I was using Elmer's wood filler.
>
> Thanks,
> Chris
|
|
Posted by on July 17, 2006, 12:59 pm
where are you from???country
|
|
Posted by JimL on July 17, 2006, 2:17 pm
wrote:
>I need to smooth out lots of screw holes and various dings in some
>plywood shelving. I was going to use wood filler putty but it seems so
>hard to work with, not very smooth, kind of dry, crumbly, difficult to
>spread. So I notice all these different spackling varieties at the
>HD--"crack shot", "vinyl spackling", "fast and final" etc. They all
>list wood as an acceptable substance, although I have always thought of
>spackling in terms of repairing drywall dings. The spacking seems to
>spread on much more easily than the wood filler.
>
>So, what's the best product to use for filling lots of holes in some
>wood that will be sanded & painted (oil based paint)? Will the
>spacking perform well, or is there some reason to stick with the wood
>filler stuff? I was using Elmer's wood filler.
>
>Thanks,
>Chris
Kevin is right on all points. Listen to him.
|
|
Posted by mm on July 17, 2006, 9:16 pm
wrote:
>I need to smooth out lots of screw holes and various dings in some
>plywood shelving. I was going to use wood filler putty but it seems so
>hard to work with, not very smooth, kind of dry, crumbly, difficult to
>spread. So I notice all these different spackling varieties at the
>HD--"crack shot", "vinyl spackling", "fast and final" etc. They all
>list wood as an acceptable substance, although I have always thought of
>spackling in terms of repairing drywall dings. The spacking seems to
>spread on much more easily than the wood filler.
>
>So, what's the best product to use for filling lots of holes in some
>wood that will be sanded & painted (oil based paint)? Will the
>spacking perform well, or is there some reason to stick with the wood
>filler stuff? I was using Elmer's wood filler.
I'm sure Kevin's advice is good, and I'm not saying not to use wood
filler, which sounds like it would be the right thing.
But I have to tell my story about spackle.
Bought a new vinyl roll floor for my apartment, then went home to take
up the old floor, before they installed the new one the next day.
Found some holes or uneven spots underneath it, and stores were closed
and didn't have anything else so I filled them with spackle. I'm sure
I stepped on these spots many times, but it seemed fine for the 8
remaining years I lived there.
It may be of course that the spackle crumbled into powder and the
powder filled up the hole as well as something solid would. Never
looked under it again.
>Thanks,
>Chris
|
| Similar Threads | Posted | | Filler For Cracked/Rotted Wood - Mr Mack's Wood Fix Equivalent | July 25, 2008, 3:32 pm |
| Wood Filler For Exterior Wood Patching ? | March 4, 2007, 1:37 pm |
| exterior wood filler | February 25, 2006, 7:29 pm |
| Wood filler for around toilet | February 22, 2007, 6:42 am |
| Insulation filler for hollow wood door? | November 28, 2005, 6:42 pm |
| laminate floor question - wood filler? | January 14, 2006, 10:29 pm |
| rotted sill +wood filler question:help please | January 7, 2007, 7:57 pm |
| Spackling compound adherence problem | August 17, 2005, 4:37 pm |
| Vinyl Spackling vs Joint Compaund | June 19, 2007, 5:52 pm |
| Patching plaster: Water putty or vinyl spackling | August 5, 2006, 5:30 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap