|
Posted by m6onz5a on June 17, 2006, 4:54 pm
I purchased this mower from a guy who had it running once this year. He
went to start it the next week and it wouldn't start, so he sold it.
So, I naturally take the carb apart and clean it real good. I put it
back together and it still won't start.
I then notice the little rocker type switch on the left side of the
mower and mess with that for a bit. I then try to start it again and it
starts right up thinking that switch was the problem.. I put the mower
away and the next day I go to start it again and nothing once again. I
once again mess with that switch and it still won't start. I tested the
switch and it does test ok.
So now I'm thinking the magneto may be bad.. Anyone know the correct
ohm readings for this coil? When I stick one lead on the plug end and
the other lead on the spade terminal on the coil and turn the flywheen
I do get a reading when the magnet passes the magneto.
Thanks
Chas
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap