If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on April 28, 2007, 10:38 pm
We are ripping up some carpet and putting down some engineered wood
flooring (concrete slab foundation in home).
The problem is we have pets and kids and I do not want a floor that
gets overly scratched and damaged. It needs to be a very hard and
durable wood. So far, tigerwood, kempas, and Brazilian cherry seem to
be at the top of the list. The tigerwood seems to have some UV
coloration issues, but looks nice. The kempas is hard to find. The
cherry is more expensive.
Anyone have opinions on these 3 woods that might help out with my
decision?
Thanks.
|
 
| |
Posted by Edwin Pawlowski on April 28, 2007, 10:49 pm
> We are ripping up some carpet and putting down some engineered wood
> flooring (concrete slab foundation in home).
>
> The problem is we have pets and kids and I do not want a floor that
> gets overly scratched and damaged. It needs to be a very hard and
> durable wood. So far, tigerwood, kempas, and Brazilian cherry seem to
> be at the top of the list. The tigerwood seems to have some UV
> coloration issues, but looks nice. The kempas is hard to find. The
> cherry is more expensive.
>
> Anyone have opinions on these 3 woods that might help out with my
> decision?
I'd be more concerned about the finish on the wood than the wood itself. The
finish on top is probably thicker than the veneer on the wood. The better
manufacturers are using very tough finishes on them. Brazilian Cherry is
one tough wood though. I'm not familiar with the others.
|
|
Posted by Larry Caldwell on April 28, 2007, 11:35 pm
jaysunem@gmail.com (jaysunem@gmail.com) says...
> We are ripping up some carpet and putting down some engineered wood
> flooring (concrete slab foundation in home).
>
> The problem is we have pets and kids and I do not want a floor that
> gets overly scratched and damaged. It needs to be a very hard and
> durable wood. So far, tigerwood, kempas, and Brazilian cherry seem to
> be at the top of the list. The tigerwood seems to have some UV
> coloration issues, but looks nice. The kempas is hard to find. The
> cherry is more expensive.
>
> Anyone have opinions on these 3 woods that might help out with my
> decision?
I put down tiger wood, but the real stuff, not the engineered flooring.
It has been very resistant to claw marks, and I have 4 dogs. It has
only been down for a couple of years, so I can't tell you about long
term durability, but it looks good so far.
I have low-E glass in my windows, so UV is not an issue.
--
For email, replace firstnamelastinitial
with my first name and last initial.
|
|
Posted by \"Fat Tony\" D'Amico on April 28, 2007, 11:46 pm
jaysunem@gmail.com wrote:
>Anyone have opinions on these 3 woods that might help out with my
>decision?
Tigerwoods would only need a 5 wood. Never heard of Kempas, but that
Brazilian Cherry is fun to watch.
|
|
Posted by dhh02192@gmail.com on April 30, 2007, 8:27 pm
On Apr 28, 10:38 pm, jaysu...@gmail.com wrote:
> We are ripping up some carpet and putting down some engineered wood
> flooring (concrete slab foundation in home).
>
> The problem is we have pets and kids and I do not want a floor that
> gets overly scratched and damaged. It needs to be a very hard and
> durable wood. So far, tigerwood, kempas, and Brazilian cherry seem to
> be at the top of the list. The tigerwood seems to have some UV
> coloration issues, but looks nice. The kempas is hard to find. The
> cherry is more expensive.
>
> Anyone have opinions on these 3 woods that might help out with my
> decision?
>
> Thanks.
You're on the right track using the engineered wood, due to the fact
that you're on a concrete slab. In order to be able to nail down 3/4"
flooring, you would have to put down 2x2 sleepers first, raising the
floor a total of 2 1/4" above the concrete slab, and it's unlikely you
would have the room to do that.
Your concern about the scratching is understandable. The newer
prefinished floors have the same type of finish as laminate flooring,
ie. they will have aluminum oxide in their finish. Does not make them
scratch proof, but it's actually better than the older urethane
finishes. (Does make them very difficult to refinish, because sand
paper is made from aluminum oxide, so they can't be mechanically
sanded down, have to be chemically sanded. As your better grade of
floors will have 25 year warranty on the finish, it's not likely
you'll ever have to deal with that.)
Laminate flooring is the most dent resistant, as it is the densest.
However, each of the wood varieties you mentioned is actually harder
than oak, and makes a great floor. A wood floor will dent (read:
acquire character). If you object to that, go look at some of the
newer laminate floors, as they will be more indentation resistant, and
the newer graphics are great, especially some of the newest Armstrong
laminates.
Tigerwood will darken with age, just like American Cherry does. This
is not considered a defect, just be aware that that will happen. I
happen to think that is one of the things that makes it beautiful.
Any one of those species will make a great floor.
Dale
|
| Similar Threads | Posted | | Brazilian slate tile | May 8, 2007, 2:44 pm |
| Tigerwood Flooring consistency | January 22, 2008, 11:38 am |
| Cherry Cabinets | January 17, 2006, 11:48 am |
| 3/4 in. Brazillian Cherry Question | December 4, 2005, 12:37 am |
| Putting up cherry wainscoting | September 5, 2007, 1:29 pm |
| Refinishing Cherry wood floor | March 8, 2007, 12:46 pm |
| Hardwood floors: Is American Cherry too soft? | August 19, 2005, 1:30 pm |
| carpenter ants in cherry blossom tree | May 13, 2007, 1:06 pm |
| Need a great HVAC installer in Cherry Hill, NJ area | September 17, 2005, 7:59 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap