Home Page link

To Cowboy: Re Torx Screw Size For Norelco Razor (my previous post)

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
To Cowboy: Re Torx Screw Size For Norelco Razor (my previous post) Robert11 06-24-2005
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Robert11 on June 24, 2005, 12:20 pm
Hi,

Much thanks for help; really appreciate it.

Hate to be a pest, but was wondering if you were able
to determine the proper screw size, per my post of 6/23, 11:51 AM, for
holding the "head" on in my Norelco 8894 XL Spectra ?

It would sure be easier for me if I could know what size
Torx to go after.

Starting a new post, as I would guess the old one is pretty buried by now.
I did try the Norelco On-Line Chat help, but the gal there was helpful, but
didn't really know
what I was talking about.

Thanks again for the help.

Regards,
Bob
---------------------
"I will post later on which T size, but my small TORX and my
razor are not in
the same location at the moment! "




Posted by cowboy on June 24, 2005, 2:56 pm
mine is a Torx T8

I bet that all Norelco's are that size.

every one I have ever seen is the same size

I think even larger Sears stores should have a Torx T8 screwdriver in stock.




> Hi,
>
> Much thanks for help; really appreciate it.
>
> Hate to be a pest, but was wondering if you were able
> to determine the proper screw size, per my post of 6/23, 11:51 AM, for
> holding the "head" on in my Norelco 8894 XL Spectra ?
>
> It would sure be easier for me if I could know what size
> Torx to go after.
>
> Starting a new post, as I would guess the old one is pretty buried by now.
> I did try the Norelco On-Line Chat help, but the gal there was helpful,
> but didn't really know
> what I was talking about.
>
> Thanks again for the help.
>
> Regards,
> Bob
> ---------------------
> "I will post later on which T size, but my small TORX and my
> razor are not in
> the same location at the moment! "
>
>
>



Posted by cowboy on June 24, 2005, 3:00 pm
here it is at Sears:

http://tinyurl.com/dtalb




Posted by blueman on June 27, 2005, 8:09 pm
> Hi,
>
> Much thanks for help; really appreciate it.
>
> Hate to be a pest, but was wondering if you were able
> to determine the proper screw size, per my post of 6/23, 11:51 AM, for
> holding the "head" on in my Norelco 8894 XL Spectra ?
>
> It would sure be easier for me if I could know what size
> Torx to go after.
>

When I wanted to open my Norelco to change the batteries, I just took
it to with me to the Sears tool department and tried different sizes
'til I found one that fit (then I ended up buying pretty much the
whole range of samll Torx screwdrivers as a "reward" to myself for
saving so much money by fixing the shaver instead of buying a new one :)

Similar ThreadsPosted
Screw Type Used In Norelco Electric Razor ? June 23, 2005, 11:51 am
About Previous Post April 13, 2008, 2:53 pm
To Art: Concerning Previous Post On Drywall Crack Repair December 20, 2005, 7:07 am
To Hallerb Re Previous Post On Shower Mold Removal June 2, 2006, 8:58 am
To en30...hotmail: Re Previous Post on Latex Over Oil Paint, or Vice Versa ? June 2, 2006, 8:54 am
What size drill bit for 1/4" mounting screw? May 28, 2006, 9:24 pm
Electrical Fixture screw size November 26, 2006, 6:42 am
What size drill bit for 1/4" mounting screw? May 30, 2007, 11:11 pm
wood fence post size - bigger is better? July 10, 2005, 5:47 am
Sorry about the double post Re: Hot water pipe size April 3, 2008, 7:39 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap