Home Page link

Transition from Engineered Wood Floor to Sliding Door w/Metal Sill

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Transition from Engineered Wood Floor to Sliding Door w/Metal Sill wpepoon 05-26-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by wpepoon on May 26, 2006, 1:05 pm
My wife and I recently installed a Bruce engineered wood floor (floating)
over concrete in our family room. My question is how to cover the gap
between the wood floor and the metal sill of the sliding door. I have some
transition molding for hardwood to vinyl that I used at the bathroom door.
Should I attach something like this to the metal sill on the sliding door?
I also have quarter-round, but I think it will stick up too far and create
a tripping hazard. Thank you.

AppliancePartsPros.com, Inc.
Posted by Edwin Pawlowski on May 26, 2006, 1:37 pm

> My wife and I recently installed a Bruce engineered wood floor (floating)
> over concrete in our family room. My question is how to cover the gap
> between the wood floor and the metal sill of the sliding door. I have some
> transition molding for hardwood to vinyl that I used at the bathroom door.
> Should I attach something like this to the metal sill on the sliding door?
> I also have quarter-round, but I think it will stick up too far and create
> a tripping hazard. Thank you.

Do they make trim of some sort? If you cannot find exactly what you want,
you will have to modify what is available. In my case, I just used a
pre-made molding but cut one side off to get proper fit. If the gap is
small, colored caulk will do.



Posted by wpepoon on May 26, 2006, 3:19 pm
Bruce has a reducer strip that works pretty with the transition to vinyl
floors. And I thought about colored caulk because the gap is only about
3/8", but the edges of the boards stick up slightly so I'm hoping to use
some sort of trim to keep the edges down. I'm just not sure if it's okay
to glue the trim piece directly to the metal sill.


Posted by shawn on May 29, 2006, 12:23 am
I used an L piece transition or 1/2 T whatever its called...

Of course the wierd thing about the engineered is doing some of these
transitions and still allowing the floor to move

What I did was use the L piece and construction glued it to the sliding
door sill/track edge....that way the floor floats/moves/slides/etc
under the upside down L (or 1/2 T) transition


Similar ThreadsPosted
Re: Transition technique between two types of engineered wood flooring? June 12, 2005, 11:06 pm
Re: Transition technique between two types of engineered wood flooring? June 13, 2005, 11:16 am
Engineered wood Floor October 25, 2007, 8:11 am
Laminate floor and engineered wood January 21, 2006, 5:59 pm
engineered wood floor in basement June 16, 2006, 2:15 pm
Engineered wood floor in basement October 15, 2007, 12:05 pm
Installing carpet over engineered wood floor? July 3, 2006, 12:36 am
Leveling above grade concrete floor for engineered wood flooring December 23, 2005, 7:57 pm
Door sill replacement-- Best wood and treatment??? April 18, 2007, 1:47 pm
drywall to wood transition March 23, 2007, 9:06 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap