|
Home Repair - - If it ain't broken, don't fix it. Otherwise look here.
|
|
|
|
If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by SteveC on February 23, 2008, 7:47 pm
Our drain plug in our main bathroom tub is corroding and is not making a
tight seal, as a result, it will not hold water for very long, it slowly
leaks out. The plug is a turn and pull/push setup.
My question, can this metal drain, the ring the plug sits into, be removed
and replaced?
What is involved with doing this?
Thanks,
Steve
|
 
| |
Posted by Joe on February 23, 2008, 10:03 pm
> Our drain plug in our main bathroom tub is corroding and is not making a
> tight seal, as a result, it will not hold water for very long, it slowly
> leaks out. =A0The plug is a turn and pull/push setup.
>
> My question, can this metal drain, the ring the plug sits into, be removed=
> and replaced?
>
> What is involved with doing this?
>
> Thanks,
> Steve
It isn't real easy and not a great project for a first timer. First
determine if you can access that end of the tub from the other side of
the wall it abuts. With the pipes in view you should be able to get
some notion of what parts you will need. Off to the box store, then,
for supplies and tools. If you opt for professional help at this
point, take credit for saving some of the labor already. Removal of
the old corroded parts may well take some special tools. Try Ace
Hardware or a good plumbing supplier if you have one that will sell to
the public. At this point you're on your own, since we can't see your
situation for specific tips on proceeding. But good luck nonetheless.
Joe
|
|
Posted by Big_Jake on February 23, 2008, 10:10 pm
> Our drain plug in our main bathroom tub is corroding and is not making a
> tight seal, as a result, it will not hold water for very long, it slowly
> leaks out. The plug is a turn and pull/push setup.
>
> My question, can this metal drain, the ring the plug sits into, be removed
> and replaced?
Yep.
> What is involved with doing this?
The hard part is often the access underneath. One of these helps
quite a bit:
http://www.hometownstores.com/detail.aspx?ID=40267&ovchn=GGL&ovcpn=Ace%20Hardware&ovcrn=Tub%20Drain%20Wrench&ovtac=CMP
You might find this helpful:
http://www.ehow.com/how_2214210_replace-tub-drain-plunger.html
JK
> Thanks,
> Steve
|
|
Posted by Bob on February 24, 2008, 9:44 pm
SteveC wrote:
> Our drain plug in our main bathroom tub is corroding and is not making a
> tight seal, as a result, it will not hold water for very long, it slowly
> leaks out. The plug is a turn and pull/push setup.
The quick fix would be to remove the drain plug and replace it with an
old-fashioned rubber stopper. If the drain plug is corroded you may be
able to replace it. Check with a local plumbing supply store.
|
| Similar Threads | Posted | | AquaGlass tub drain leaking | October 14, 2005, 1:42 am |
| Leaking Kitchen Drain/Dishwasher | April 1, 2007, 1:11 am |
| Leaking Dishwasher - plugged drain? | September 24, 2005, 11:50 am |
| Leaking Drain pine in the Wall ??? | May 14, 2007, 12:58 pm |
| leaking dishwasher drain hose | October 15, 2008, 4:46 pm |
| GE dishwasher GSD4030Z02WW drain valve leaking | October 14, 2006, 11:42 pm |
| Leaking joints of kitchen drain pipe | January 6, 2007, 3:59 pm |
| Kitchen drain leaking between Garbage disposal and old brass pipe outlet | December 14, 2006, 10:55 am |
| Shower Drain Strainer Won't Fit, Part II -- How to Remove a Small Length of a Drain Pipe? | February 6, 2007, 9:57 pm |
| Toilet drain problems - found sandy substance build-up in drain | August 9, 2006, 11:06 pm |
|
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap