|
Posted by Heathcliff on October 2, 2006, 10:34 am
Speedy Jim wrote:
> Heathcliff wrote:
>
> > I have hot-water heat with an old (probably 80 year old) system. The
> > radiators are the big old fashioned kind. I am trying to restore the
> > valves on the radiators so that they operate and individual radiators
> > can be turned on and off. I removed the handle (round, kind of
> > donut-shaped thing) on one, loosened the packing the nut, if that's the
> > right term, and applied some penetrating oil. I was able to get the
> > stem to turn and I think it's operating now, but it only turns about
> > 180 degrees. There seems to be a hard stop that prevents it turning
> > more than that. Is that all it's supposed to turn? Is it a ball
> > valve? I haven't yet turned on the heat to test whether it actually
> > turns the radiator on and off. Just curious if someone with experience
> > on this type of system can verify that is how the valves are supposed
> > to work. Thanks, -- H
> >
>
> That may be all it should turn.
> Probably not a true ball valve as we know them;
> my guess would be a sleeve valve with a cutout opening
> on one side.
>
> These valves may not provide full shutoff (deliberate)
> in order to keep a very small flow thru all the radiators.
>
> Jim
Thanks, that seems to be it. All 4 of the ones I loosened up did the
same thing: turn about 180 degrees with a hard stop at either end.
Cranked up the boiler and found that the radiators turned "off" heated
up more slowly and never got quite as hot, but they still got fairly
hot. I think I will try turning all the upstairs radiators "off" to
see if that will correct the tendency for the upstairs to be warmer
than downstairs.
I may try replacing some of the valves but that makes it a much bigger
project -- more old fittings to turn (always a risk of breaking
something or winding up with a leak), have to partially drain the
system, etc. I am thinking I would likely have to move a radiator in
order to remove it's valve, since the valves are the 90-degree bend
type and would have to be rotated on a vertical axis to be removed.
Thanks, Jim, for yet another informative post.
-- H
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap