If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Mel on April 17, 2007, 9:14 am
Does anyone know a website what will be of help me with tips on building new
wooden drawers to go under the shop bench I am building?
|
|
Posted by dpb on April 17, 2007, 1:43 pm
> Does anyone know a website what will be of help me with tips on building new
> wooden drawers to go under the shop bench I am building?
I don't know any specific real sites, but a google search I sure would
show up a bunch (like in the thousands) on all kinds -- dovetails, box
joint, router made drawer joints, dado-housed, simple butt, ...
There is always Fine Woodworking (www.taunton.com) and all the other
woodworking mags and rec.woodworking, too.
What you want?
|
|
Posted by GROVER on April 17, 2007, 2:10 pm
> > Does anyone know a website what will be of help me with tips on building new
> > wooden drawers to go under the shop bench I am building?
> I don't know any specific real sites, but a google search I sure would
> show up a bunch (like in the thousands) on all kinds -- dovetails, box
> joint, router made drawer joints, dado-housed, simple butt, ...
> There is always Fine Woodworking (www.taunton.com) and all the other
> woodworking mags and rec.woodworking, too.
> What you want?
Mel,
I checked the on line index for Fine Woodworking Magazine and there
were so many references to the topic "Drawers" I lost count. You can
get DVDs of past editions or try the public library. Some people have
complete sets of the issues and use them in conjuction with the on
line index as an encyclopedia.
Joe G
|
|
Posted by Bob G. on April 18, 2007, 12:11 pm
>Mel,
>I checked the on line index for Fine Woodworking Magazine and there
>were so many references to the topic "Drawers" I lost count. You can
>get DVDs of past editions or try the public library. Some people have
>complete sets of the issues and use them in conjuction with the on
>line index as an encyclopedia.
>Joe G
I honestly would not expect to see very many "how too" articles in
Fine Woodworking ...that Magazine is really not published for harry
homeowner etc... more for the advanced woodworker.
Popular Woodworking, should have more BUT it would be quicker for the
OP just to drive to Lowes or Hom Depot and check out the magazines and
project idea rags they sell...
Bob G.
|
|
Posted by dpb on April 18, 2007, 1:44 pm
> >Mel,
> >I checked the on line index for Fine Woodworking Magazine and there
> >were so many references to the topic "Drawers" I lost count. You can
> >get DVDs of past editions or try the public library. Some people have
> >complete sets of the issues and use them in conjuction with the on
> >line index as an encyclopedia.
> >Joe G
> I honestly would not expect to see very many "how too" articles in
> Fine Woodworking ...that Magazine is really not published for harry
> homeowner etc... more for the advanced woodworker.
...
Not specifically, no, but...I've been subscriber since V1, #about 3 so
have pretty good idea of content. There are many articles that
include drawers and workbenches, etc., and the sidebars of those are
often at a moderate to less level. If nothing else, will be an eye-
opener of possibilities which can't be all bad! :)
But, in particular, there has been a noticeable shift over the last
few years to more introductory/beginner/low intermediate audience as
opposed to the perceived "elitist" view of years ago. Not that work
shown isn't to be admired... :)
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Real Men Build Their Own Work Bench.. | June 8, 2007, 5:53 pm |
| using hand tools to build a woodworking work bench instead of power tools | August 9, 2007, 3:38 pm |
| Work Bench | December 2, 2006, 10:23 pm |
| Home Work Bench | August 1, 2005, 12:03 pm |
| Work Bench Lock | October 19, 2005, 2:19 am |
| How to open a B&D work bench? | January 2, 2006, 11:12 pm |
| Can one buy drawers | July 20, 2009, 12:00 am |
| Fridge . Vegetable drawers | August 13, 2007, 5:43 pm |
| lubricant for freezer drawers | August 2, 2008, 8:09 am |
| Base Cabinet Toe-Kick Drawers | September 3, 2006, 9:57 pm |
|
|
> wooden drawers to go under the shop bench I am building?