|
Posted by Ken on August 23, 2007, 2:43 pm
jtees4 wrote:
> I have a 3 year old Admiral clothes washer. Yes, I know they have a
> rep for being junk. Starting last week it does the following: It
> washes normally. It rinses normally. It gets to the spin cycle and
> spins very slowly. It goes through the cycle and ends normally. When
> it is done, there is still water in the machine and the softener in
> the dispenser. I manually turn it back to "spin" and it spins fast as
> it should, and it shuts down and everything is fine. Any ideas what's
> going on here? Thanks.
Can't say for certain, but I think I would check for a loose belt or
some restriction related to the pump. It might be slow in removing the
water from the machine and cannot spin properly. After the cycle has
elapsed, there might be enough water extracted that it can now spin.
Just a thought.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> rep for being junk. Starting last week it does the following: It
> washes normally. It rinses normally. It gets to the spin cycle and
> spins very slowly. It goes through the cycle and ends normally. When
> it is done, there is still water in the machine and the softener in
> the dispenser. I manually turn it back to "spin" and it spins fast as
> it should, and it shuts down and everything is fine. Any ideas what's
> going on here? Thanks.