Home Page link

Washing Machine Valves

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Washing Machine Valves Vince 09-09-2005
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Vince on September 9, 2005, 3:45 pm

The existing control valves are leaking and I want to replace them (32
yrs old).

Home Depot sells valves named "washing machine valve". The have the
typical washer at end of cylinder that travels.

I dont know if these are gate valves or ball valves or whatever.

Which type should I use as a replacement?

Thanks.




Posted by Savvy 1 on September 9, 2005, 1:52 pm
> The existing control valves are leaking and I want to replace them (32
> yrs old).
> Home Depot sells valves named "washing machine valve". The have the
> typical washer at end of cylinder that travels.
> I dont know if these are gate valves or ball valves or whatever.
> Which type should I use as a replacement?
> Thanks.

I wouldn't think it would matter as long as the size of the valve inlet
matched your existing supply pipes.

S1




Posted by Mikepier on September 9, 2005, 11:53 am
I agree. I used "boiler valves" that they sell. It's the same thing.



Posted by Tom on September 10, 2005, 2:42 am

> The existing control valves are leaking and I want to replace them (32
> yrs old).
> Home Depot sells valves named "washing machine valve". The have the
> typical washer at end of cylinder that travels.
> I dont know if these are gate valves or ball valves or whatever.
> Which type should I use as a replacement?
> Thanks.
Sounds like you're describing a gate valve. I would find a washing machine
valve that uses ball valves. With these you can turn off both the hot and
cold water source with a quarter turn of the valve lever. And you should
always turn off the water when done washing. The solenoid mix valves in
washing machines are prone to failure (usually when you've left the house
for a long weekend) and can open up and flood the house even though the
machine is turned off. That's to say nothing about the hoses bursting
sometimes, also. I've sold washers for over 25 years and I believe that all
instruction manuals still caution you to turn off the water. You'll never
get in the habit of turning off the water if you have to crank down two gate
valves each time.
Tom.




Similar ThreadsPosted
Washing Machine Water Inlet Valves - Cheap Source of Solonoid Control Valves? January 3, 2007, 7:11 pm
Washing machine water valves. June 29, 2007, 10:13 am
washing machine dry well September 18, 2005, 8:35 am
washing machine September 28, 2006, 10:57 pm
washing machine January 9, 2007, 1:24 pm
Re: Washing machine ... March 31, 2007, 8:43 pm
washing machine April 13, 2009, 4:42 pm
Washing Machine Overflow February 6, 2005, 11:48 pm
Washing Machine Repair July 20, 2008, 9:29 pm
Smelly washing machine July 27, 2005, 1:13 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap