If you were Registered and logged in, you could reply and use other advanced thread options
Posted by Stibs on September 2, 2006, 1:38 pm
My sears washing machine only fills up 3/4 full. How can i increase the
water level?
Posted by dpb on September 2, 2006, 2:25 pm
Stibs wrote:
> My sears washing machine only fills up 3/4 full. How can i increase the
> water level?
Not to be too obvious, but you did check for a level/load size control
and the operations booklet?
Posted by on September 2, 2006, 8:18 pm
Do not fool with the pressure switch. Just replace it. If the water
level is still at the same point, you know that is what is meant to be.
Posted by SJF on September 2, 2006, 8:35 pm
> My sears washing machine only fills up 3/4 full. How can i increase the
> water level?
That's about the way my GE fills. They've got to have some "freeboard" to
allow for sloshing and clothing that rises above the water due to entrapped
air. I suspect what you are seeing is the way it is supposed to be at
maximum loading.