|
Posted by on August 8, 2006, 5:58 am
Yep, it sounds to me like a leak next to the casing. The pipe
normally attaches to the pitless adaptor at the side facing the house.
Start digging. Generally about 6 feet down. However, before you dig,
take a piece of 3/4" pipe about a foot long and drive it in the soil.
(on side facing the house) Pull it out and push all the mud out of it
with a stick, and push it back in the hole. See if it fills with
water. If it does, you probably got a leak. If not, wait a week or
two and see what happens.
Also look in the well. Is the water level near the surface of the
ground? If it is, you might be having a very high water table
situation, and if you are, thats the problem, and you DO NOT want to
dig a hole out of possible collapse of the hole. I know all about
this. I got nearly buried once from this exact thing.
Of course if the water table is high, you really should not have water
coming up out of the ground and your casing might be bad. Is your
water tested safe?
wrote:
>
>You never know what you will find till you dig, I had the same
>situation a couple of weeks ago, I found a compression splice that just
>needed a turn. Good thing about it, it won't be hard to find or hard to
>dig for that matter. If you find a crack in a plastic line and it isn't
>too big one of those compression fittings could do the trick. Larger
>than that, you can glue in a adequate length of pipe and use one of
>those for a pipe union to join it to the existing line. Even if it is
>metal, a proper sized plastic repair would work with 2 of the plastic
>compression things, they work on metal too.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap