|
Posted by nntp.fuse.net on November 30, 2007, 5:15 pm
I've checked all the drawings on Sears.com. No where there is the detail
showing the frame with the 3 studs that do not appear to lock anything.
These studs are lying pointed side up and do not seem to hit any holes. I am
puzzled why these things are there.
> Check Sears site:
>
> http://www3.sears.com/
>
> You can see diagrams under appliance parts.
>
> In fact if you can look at this diagram:
>
>
http://www3.sears.com/imaging/ImagePageJava.shtml?productTypeID=0153200&brandID=0582&modelDesc=AUTOMATIC%20WASHER&modelNumber=11020932991&documentID=P9070102&documentTypeID=PLDM&documentClassCode=PM&titleType=TOP%20AND%20CABINET&titleID=00001&
> you will find where the parts literature may be already stuffed in your
> machine at the factory.
>
>
>
>
> This is washing machine- SEARS KENMORE- Model Number-110-20932991 and
> Serial No. CJ3812668. Machine will leak water when the bleach bowl fills.
> Looking from under the machine it appears that the tub is not returning to
> its resting place; and the water misses the lower collector. We tried to
> adjust the tub but it does slide easily. The frame has 3 studs that do not
> appear to lock anything. These studs are lying pointed side up and do not
> seem to hit any holes. Is this normal?
> (These studs are actually inside a plastic protrusion attached to the
> frame.)
> Please reply with some ideas on how to secure the tub/base assembly so
> that the bleach outlet is concentric with the collector located on the
> tub.
>
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap