Home Page link

Waterproof Seal for Wood--with standing water

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Waterproof Seal for Wood--with standing water matt.markovich 03-31-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on March 31, 2008, 4:20 pm
Greetings all,

I'm stumped. I recently sank a wood box about 2 1/2 feet below ground
so I can have a removable 4x4 pole on which to hang a hammock. All
was well--the concrete was setting, etc. but when I came out the
following morning there was about 1 1/2 feet of water that had seeped
in. I can suck it out using a wet/dry vac, but i want to seal it
internally to waterproof it. The problem is it will never be dry
now. I can suck out all the water and it won't refill for about 30
min-1 hr. Any thoughts?

Thanks!

Matt

Posted by hallerb@aol.com on March 31, 2008, 5:50 pm
On Mar 31, 3:20=EF=BF=BDpm, matt.markov...@gmail.com wrote:
> Greetings all,
>
> I'm stumped. =EF=BF=BDI recently sank a wood box about 2 1/2 feet below gr=
ound
> so I can have a removable 4x4 pole on which to hang a hammock. =EF=BF=BDAl=
l
> was well--the concrete was setting, etc. =EF=BF=BDbut when I came out the
> following morning there was about 1 1/2 feet of water that had seeped
> in. =EF=BF=BDI can suck it out using a wet/dry vac, but i want to seal it
> internally to waterproof it. =EF=BF=BDThe problem is it will never be dry
> now. =EF=BF=BDI can suck out all the water and it won't refill for about 3=
0
> min-1 hr. =EF=BF=BDAny thoughts?
>
> Thanks!
>
> Matt

congrats you have a shallow well............

you need to use a steel pole even if you have to abandon the current
attempt

Posted by on April 1, 2008, 4:04 pm
> On Mar 31, 3:20=EF=BF=BDpm, matt.markov...@gmail.com wrote:
>
> > Greetings all,
>
> > I'm stumped. =EF=BF=BDI recently sank a wood box about 2 1/2 feet below =
ground
> > so I can have a removable 4x4 pole on which to hang a hammock. =EF=BF=BD=
All
> > was well--the concrete was setting, etc. =EF=BF=BDbut when I came out th=
e
> > following morning there was about 1 1/2 feet of water that had seeped
> > in. =EF=BF=BDI can suck it out using a wet/dry vac, but i want to seal i=
t
> > internally to waterproof it. =EF=BF=BDThe problem is it will never be dr=
y
> > now. =EF=BF=BDI can suck out all the water and it won't refill for about=
30
> > min-1 hr. =EF=BF=BDAny thoughts?
>
> > Thanks!
>
> > Matt
>
> congrats you have a shallow well............
>
> you need to use a steel pole even if you have to abandon the current
> attempt

Sigh. Well, at least I know if/when the apocalypse comes that I'll
have water. The issue is that it's already set in concrete and it's
built to juuust fit the 4x4. Anything I can slide in there or a latex
coating I can paint in? I looked all over creation for a pre-made
steel or aluminum tube that would fit the 4x4 before building the wood
frame but no dice...

Thanks for your help!

Posted by JimR on April 1, 2008, 5:10 pm

> On Mar 31, 3:20?pm, matt.markov...@gmail.com wrote:
>
> > Greetings all,
>
> > I'm stumped. ?I recently sank a wood box about 2 1/2 feet below ground
> > so I can have a removable 4x4 pole on which to hang a hammock. ?All
> > was well--the concrete was setting, etc. ?but when I came out the
> > following morning there was about 1 1/2 feet of water that had seeped
> > in. ?I can suck it out using a wet/dry vac, but i want to seal it
> > internally to waterproof it. ?The problem is it will never be dry
> > now. ?I can suck out all the water and it won't refill for about 30
> > min-1 hr. ?Any thoughts?
>
> > Thanks!
>
> > Matt
>
> congrats you have a shallow well............
>
> you need to use a steel pole even if you have to abandon the current
> attempt

Sigh. Well, at least I know if/when the apocalypse comes that I'll
have water. The issue is that it's already set in concrete and it's
built to juuust fit the 4x4. Anything I can slide in there or a latex
coating I can paint in? I looked all over creation for a pre-made
steel or aluminum tube that would fit the 4x4 before building the wood
frame but no dice...

Thanks for your help!

Use a PT1 treated 4x4, which is treated for ground contact. Since you're
presumably going to be removing it when the hammock is not being used, it
will have a chance to dry out and should last a long time.

Alternative -- a good metal shop can make a post to your dimensions that
will fit the opening -- but I think just using PT lumber will fit your
requirements

Also -- Where is the water coming from? If you're in Florida, I understand
it filling in the hole, but elsewhere you might want to see where the water
is coming from -- downspout, ruptured irrigation line, leaking main or drain
line, etc., and if the water is not from natural ground-water sources you
can fix the problem there. --



Posted by on April 2, 2008, 11:20 am
>
>
>
>
>
>
> > On Mar 31, 3:20?pm, matt.markov...@gmail.com wrote:
>
> > > Greetings all,
>
> > > I'm stumped. ?I recently sank a wood box about 2 1/2 feet below ground=

> > > so I can have a removable 4x4 pole on which to hang a hammock. ?All
> > > was well--the concrete was setting, etc. ?but when I came out the
> > > following morning there was about 1 1/2 feet of water that had seeped
> > > in. ?I can suck it out using a wet/dry vac, but i want to seal it
> > > internally to waterproof it. ?The problem is it will never be dry
> > > now. ?I can suck out all the water and it won't refill for about 30
> > > min-1 hr. ?Any thoughts?
>
> > > Thanks!
>
> > > Matt
>
> > congrats you have a shallow well............
>
> > you need to use a steel pole even if you have to abandon the current
> > attempt
>
> Sigh. =A0Well, at least I know if/when the apocalypse comes that I'll
> have water. =A0The issue is that it's already set in concrete and it's
> built to juuust fit the 4x4. =A0Anything I can slide in there or a latex
> coating I can paint in? =A0I looked all over creation for a pre-made
> steel or aluminum tube that would fit the 4x4 before building the wood
> frame but no dice...
>
> Thanks for your help!
>
> Use a PT1 treated 4x4, which is treated for ground contact. =A0Since you'r=
e
> presumably going to be removing it when the hammock is not being used, it
> will have a chance to dry out and should last a long time.
>
> Alternative -- a good metal shop can make a post to your dimensions that
> will fit the opening -- but I think just using PT lumber will fit your
> requirements
>
> Also -- Where is the water coming from? =A0If you're in Florida, I underst=
and
> it filling in the hole, but elsewhere you might want to see where the wate=
r
> is coming from -- downspout, ruptured irrigation line, leaking main or dra=
in
> line, etc., and if the water is not from natural ground-water sources you
> can fix the problem there. -- =A0- Hide quoted text -
>
> - Show quoted text -

Thanks for all your help! The lawn is enclosed in a concrete wall
structure and I think it just sucks up water and doesn't drain
effectively. Also, we're on a downslope with certain portions
(including basement) below ground level. The ground tends to saturate
quickly. As you might imagine, there's a whole sump project in my
future...

Similar ThreadsPosted
Deck, standing water August 27, 2007, 12:25 pm
Water standing near house September 19, 2007, 8:16 pm
Standing Water on Leaking Roof July 31, 2006, 1:33 pm
Standing Water Despite Sump Pump April 18, 2007, 6:17 pm
screen porch standing water October 5, 2007, 1:45 pm
Standing Water at Base of Foundation (Slab) October 3, 2006, 8:56 pm
Standing Water Inside Whirpool Duet Washer April 7, 2007, 12:12 pm
to waterproof or not to waterproof(and stain) pressure treated wood (kids home swingset)... May 10, 2007, 10:14 am
Thompsons water seal May 31, 2008, 10:20 pm
Thompsons water seal question September 20, 2006, 9:23 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap