|
Posted by Mark Lloyd on May 3, 2008, 6:03 pm
wrote:
>---MIKE--- wrote:
>> My new digital FM tuner puts out too strong a signal compared to my
>> other inputs (TV and CD). I want to install a dual potentiometer
>> between the tuner and preamp to reduce the volume. What is the best
>> value pot to use for this. I have ordered 50K, 100K, 250K and 500K
>> from Mouser (the pots are cheap - the shipping is not).
>>
>
>Hint: If there are three terminals that connect to the innards of the pot,
>short two adjacent ones together (center and either side).
>
>This prevents a full open circuit when the wiper inside makes a poor contact
>or hits a bump.
>
I've seen a lot of audio wiring diagrams, and that's not the way it's
done. IIRC you connect the fixed resistor across the source and the
wiper of the pot to the load. The source never has less than 50 ohms
across it.
--
Mark Lloyd
http://notstupid.laughingsquid.com
"So far as I can remember, there is not one word
in the Gospels in praise of intelligence."
--Bertrand Russell
|