Home Page link

Wiring Electrical Outlets With 3-way switch

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Wiring Electrical Outlets With 3-way switch craneranch 04-22-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on April 22, 2008, 7:07 pm
I am putting lights in my basement and would like a wiring diagram
that shows how to connect six electrical outlets that stretch from one
end of the basement to the other, with a three-way switch on either
end of the circuit. The power comes in to the circuit in the middle
of the run. It seems like a simple thing but I keep tripping the
breaker.

Posted by Terry on April 22, 2008, 9:07 pm
On Tue, 22 Apr 2008 16:07:59 -0700 (PDT), craneranch@gmail.com wrote:

>I am putting lights in my basement and would like a wiring diagram
>that shows how to connect six electrical outlets that stretch from one
>end of the basement to the other, with a three-way switch on either
>end of the circuit. The power comes in to the circuit in the middle
>of the run. It seems like a simple thing but I keep tripping the
>breaker.

Bring the power in to one of the switches or the other. Take 12/3/G
to the other switch then take 12/2/G to each light.

You would need a 12/5/G to do it like you are trying to do.

Do they make 12/5?




Posted by RBM on April 22, 2008, 8:41 pm

> On Tue, 22 Apr 2008 16:07:59 -0700 (PDT), craneranch@gmail.com wrote:
>
>>I am putting lights in my basement and would like a wiring diagram
>>that shows how to connect six electrical outlets that stretch from one
>>end of the basement to the other, with a three-way switch on either
>>end of the circuit. The power comes in to the circuit in the middle
>>of the run. It seems like a simple thing but I keep tripping the
>>breaker.
>
> Bring the power in to one of the switches or the other. Take 12/3/G
> to the other switch then take 12/2/G to each light.
>
> You would need a 12/5/G to do it like you are trying to do.
>
> Do they make 12/5?

You can run 2 conductor w/ ground from the box where the power is to one
wall switch. Run 3 conductor w/ground from that switch to the second, and 2
conductor w/ground from the box where the power is to each other lighting
outlet. In the originating box, connect the feed neutral to the neutral
conductor going to the next box and the neutral of the fixture at that box.
conect the feed hot wire to the white wire of the 2 conductor going to the
first switch and mark it some other color than white. Connect the black wire
going to the first switch to the black wire going to the next box and the
black wire of the fixture at that box. Next, in the first switch box,
connect the white from the 2 conductor to the black of the 3 conductor.
Connect the black of the 2 conductor to the common terminal of the three way
switch, and connect the white and red wires of the 3 conductor to the
travellers of the three way switch. Next, in the second switch box, connect
the black to common terminal and the red and white to the travellers. Last,
connect all grounds together and to any metal boxes
>
>



Posted by Red Green on April 22, 2008, 11:13 pm

>
>> On Tue, 22 Apr 2008 16:07:59 -0700 (PDT), craneranch@gmail.com wrote:
>>
>>>I am putting lights in my basement and would like a wiring diagram
>>>that shows how to connect six electrical outlets that stretch from
>>>one end of the basement to the other, with a three-way switch on
>>>either end of the circuit. The power comes in to the circuit in the
>>>middle of the run. It seems like a simple thing but I keep tripping
>>>the breaker.
>>
>> Bring the power in to one of the switches or the other. Take 12/3/G
>> to the other switch then take 12/2/G to each light.
>>
>> You would need a 12/5/G to do it like you are trying to do.
>>
>> Do they make 12/5?
>
> You can run 2 conductor w/ ground from the box where the power is to
> one wall switch. Run 3 conductor w/ground from that switch to the
> second, and 2 conductor w/ground from the box where the power is to
> each other lighting outlet. In the originating box, connect the feed
> neutral to the neutral conductor going to the next box and the neutral
> of the fixture at that box. conect the feed hot wire to the white wire
> of the 2 conductor going to the first switch and mark it some other
> color than white. Connect the black wire going to the first switch to
> the black wire going to the next box and the black wire of the fixture
> at that box. Next, in the first switch box, connect the white from the
> 2 conductor to the black of the 3 conductor. Connect the black of the
> 2 conductor to the common terminal of the three way switch, and
> connect the white and red wires of the 3 conductor to the travellers
> of the three way switch. Next, in the second switch box, connect the
> black to common terminal and the red and white to the travellers.
> Last, connect all grounds together and to any metal boxes
>>
>>
>
>

You're overcomplicating things RBM. Check out this Red Green creativity.

Connect all lights in series with 2 conductor pull chain switches. Run
string from one location to the other. Tie/tie wrap/duct tape all pull
chains to string. Pull string from either end to operate.

Posted by Jeff Wisnia on April 23, 2008, 12:40 pm
Red Green wrote:
>
>
>>
>>>On Tue, 22 Apr 2008 16:07:59 -0700 (PDT), craneranch@gmail.com wrote:
>>>
>>>
>>>>I am putting lights in my basement and would like a wiring diagram
>>>>that shows how to connect six electrical outlets that stretch from
>>>>one end of the basement to the other, with a three-way switch on
>>>>either end of the circuit. The power comes in to the circuit in the
>>>>middle of the run. It seems like a simple thing but I keep tripping
>>>>the breaker.
>>>
>>>Bring the power in to one of the switches or the other. Take 12/3/G
>>>to the other switch then take 12/2/G to each light.
>>>
>>>You would need a 12/5/G to do it like you are trying to do.
>>>
>>>Do they make 12/5?
>>
>>You can run 2 conductor w/ ground from the box where the power is to
>>one wall switch. Run 3 conductor w/ground from that switch to the
>>second, and 2 conductor w/ground from the box where the power is to
>>each other lighting outlet. In the originating box, connect the feed
>>neutral to the neutral conductor going to the next box and the neutral
>>of the fixture at that box. conect the feed hot wire to the white wire
>>of the 2 conductor going to the first switch and mark it some other
>>color than white. Connect the black wire going to the first switch to
>>the black wire going to the next box and the black wire of the fixture
>>at that box. Next, in the first switch box, connect the white from the
>>2 conductor to the black of the 3 conductor. Connect the black of the
>>2 conductor to the common terminal of the three way switch, and
>>connect the white and red wires of the 3 conductor to the travellers
>>of the three way switch. Next, in the second switch box, connect the
>>black to common terminal and the red and white to the travellers.
>>Last, connect all grounds together and to any metal boxes
>>
>>>
>>
>
> You're overcomplicating things RBM. Check out this Red Green creativity.
>
> Connect all lights in series with 2 conductor pull chain switches. Run
> string from one location to the other. Tie/tie wrap/duct tape all pull
> chains to string. Pull string from either end to operate.


ROTFLMAO

But, if I tried that, with my luck the pull switches would get out of
sync with each other pretty quickly.<G>

Jeff (Who thinks you shouldn't have written "in series" either.)


--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
3way switch with dimmer May 27, 2006, 10:55 pm
3way (DPDT) timer switches October 10, 2006, 1:03 pm
electrical outlets April 16, 2007, 12:48 am
Question about red electrical outlets January 4, 2006, 2:19 pm
No boxes behind electrical outlets August 2, 2006, 8:22 am
Electrical outlets near doorways. November 27, 2006, 6:43 pm
Ungrounded Electrical outlets December 21, 2006, 5:52 pm
Wiring Switches & Outlets 101 - Extremely Simple Pics April 23, 2008, 11:06 pm
replacing older electrical outlets January 30, 2006, 11:44 am
Putting electrical outlets in brick? July 16, 2006, 8:35 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap