|
Posted by G Henslee on July 19, 2005, 10:12 am
G Henslee wrote:
> dave wrote:
>
>> what type of adhesive is 'ordinarily' used these days to 'stick down'
>> ceramic tile on TOP of linoleum? this is in a small residential
>> kitchen and front hallway, each of those areas roughly 55 sq feet....
>
>
> Latex modified thinset.
>
>>
>> I already tested all over (both areas) with a toilet plunger, and the
>> linoleum is "stuck down GOOD'n'TIGHT" everywhere to the slab, central
>> areas included, wall TO wall, *NOT* just along the edges...
>
>
> Good adhesion of the lino is a must. Youi should have problems with
> this tile install if you use the modified t/s.
>
>
>>
>> also, is there some type of 'linoleum softener' or 'pre-primer'
>> involved? plan is to grout -between- the tiles 'in the normal manner'
>> afterward...is special grout involved too? or just using some type of
>> 'additive' to everyday normal grout, or?
>
>
> No 'special' grout required. Sanded grout for spaced jopints and
> unsanded for tight joints.
>
>
>
One more thing. If it's a 'cushion' type liono, it has to be removed.
|