|
Posted by Doug Kanter on August 7, 2005, 4:47 pm
> Hi,all,
> my husband passed away a few months ago,and now I have joined the world of
> "home repair"...well.... kind of.
> Can anyone assist me in placing the burner ,with the venturi ,back into
> place in my Kenmore propane barbeque.
>
> I noticed that one side section of the burner was not working properly...I
> had both sides on "high",but the flame on the right side was very low.
> Maybe something was plugged....!!!????
>
> Later,when everything cooled,I removed all the grills,and lava,AND the
> burner to clean,and when I tried to replace the burner,I could not get
> the
> venturi tubes placed correctly over the orifices...is there a trick?
>
> I went to the manual,but it showed connecting the venturi BEFORE the
> plate,and knobs were installed...do I have to remove the plate, and the
> knobs again?...I tried the knobs, and it feels like I will need a crowbar
> to
> remove them.
> Any suggestions are appreciated.
>
> The barbeque has lots of years left
> Thanks,Rose
>
>
I can't help with the replacement of the part, but: Believe it or not, there
are spiders that will set up home in the burner tubes. Stores with a good
selection of cleaning accessories sell a skinny brush specifically for
clearing the tubes.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap