Home Page link

carburator adjustment honda mower

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
carburator adjustment honda mower p4o2 06-10-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by p4o2 on June 10, 2008, 10:40 am
There are two screws. One changes a stop on a control. The second will
only allow about a 60* adjustment. What does this 2nd adjuster do?

Posted by dpb on June 10, 2008, 10:51 am
p4o2 wrote:
> There are two screws. One changes a stop on a control. The second will
> only allow about a 60* adjustment. What does this 2nd adjuster do?

Typical carb has two -- idle and mixture.

--

Posted by bq340 on June 10, 2008, 12:50 pm
p4o2 wrote:
> There are two screws. One changes a stop on a control. The second will
> only allow about a 60* adjustment. What does this 2nd adjuster do?


It is a air mix screw. Adjusted for fastest idle speed.

MikeB

Posted by ransley on June 10, 2008, 1:07 pm
> There are two screws. One changes a stop on a control. The second will
> only allow about a 60* adjustment. What does this 2nd adjuster do?

One is likely rpm to the govenor, and you need 3600 rpm for 120v, to
set it you need a v meter, I would not start turning stuff until you
know what you are doing or need.

Posted by p4o2 on June 10, 2008, 7:16 pm
>
> > There are two screws. One changes a stop on a control. The second will
> > only allow about a 60* adjustment. What does this 2nd adjuster do?
>
> One is likely rpm to the govenor, and you need 3600 rpm for 120v, to
> set it you need a v meter, I would not start turning stuff until you
> know what you are doing or need.

This honda mower is a real pain to get to the screws. No way can I
turn them while the mower is running (in fact a tube going to the air
cleaner blocks the way)

Similar ThreadsPosted
Lawn Mower Speed adjustment July 3, 2007, 12:25 pm
MTD push mower wheel repair - how to remove bolt from Height Adjustment Plate July 8, 2006, 7:53 pm
Honda mower quite May 13, 2008, 3:01 pm
Help with Honda Riding Mower September 29, 2005, 3:29 pm
Honda Mower Antics June 16, 2007, 4:48 pm
Honda Lawn Mower August 5, 2008, 5:08 pm
Honda HT-R 3009 Mower starter March 19, 2007, 11:59 pm
Honda Mower Blade Replacement August 12, 2008, 9:00 am
Honda Harmony 1011 Mower - need starter June 21, 2005, 7:09 pm
Honda lawn mower valve problem October 23, 2007, 4:48 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap