Home Page link

connecting multi-strand to copper wire for lighting

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 5       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
connecting multi-strand to copper wire for lighting bob_monkhouse35 02-28-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on February 28, 2008, 12:02 am
Does anyone know the best way to connect a multi-strand wire to copper
wire?
This is for a recessed light in the ceiling of our top floor hallway.
Therefore the housing for the light is going in the attic/roof. The
housing itself includes the multi-strand wire, that I have to connect
the copper wire to that is fed in from the light switch.

Right now, I have used the screw on cone shaped type connectors (I
forget what they're called ... merriates????) but the connection does
not look that good - the multi-strand wire seems to fray quite easily.

Thx!!

PexSupply PEX Tools 468x60
Posted by HaLiGoOn on February 28, 2008, 5:11 am
bob_monkhouse35@hotmail.com wrote in news:175c3cca-f7ae-4993-b394-
733aef4a7122@x30g2000hsd.googlegroups.com:

> Does anyone know the best way to connect a multi-strand wire to copper
> wire?
> This is for a recessed light in the ceiling of our top floor hallway.
> Therefore the housing for the light is going in the attic/roof. The
> housing itself includes the multi-strand wire, that I have to connect
> the copper wire to that is fed in from the light switch.
>
> Right now, I have used the screw on cone shaped type connectors (I
> forget what they're called ... merriates????) but the connection does
> not look that good - the multi-strand wire seems to fray quite easily.
>
> Thx!!
>

They are generically called "wire nuts".

You need to twist the stranded wire with your fingers to make it similar to
a solid wire, next lead off with the stranded wire before putting on the
wire nut. That is, put the stranded wire higher than the solid wire, then
twist on the wire nut.


Here is a similar description with a photo.

http://www.rd.com/familyhandyman/content/37173/

Posted by a on February 28, 2008, 10:01 am
HaLiGoOn wrote:
> bob_monkhouse35@hotmail.com wrote in news:175c3cca-f7ae-4993-b394-
> 733aef4a7122@x30g2000hsd.googlegroups.com:
>
>> Does anyone know the best way to connect a multi-strand wire to copper
>> wire?
>> This is for a recessed light in the ceiling of our top floor hallway.
>> Therefore the housing for the light is going in the attic/roof. The
>> housing itself includes the multi-strand wire, that I have to connect
>> the copper wire to that is fed in from the light switch.
>>
>> Right now, I have used the screw on cone shaped type connectors (I
>> forget what they're called ... merriates????) but the connection does
>> not look that good - the multi-strand wire seems to fray quite easily.
>>
>> Thx!!
>>
>
> They are generically called "wire nuts".
>

Not round here they're not. They're called "marrets".

a

Posted by a on February 28, 2008, 10:04 am
HaLiGoOn wrote:
> bob_monkhouse35@hotmail.com wrote in news:175c3cca-f7ae-4993-b394-
> 733aef4a7122@x30g2000hsd.googlegroups.com:
>
>> Does anyone know the best way to connect a multi-strand wire to copper
>> wire?
>> This is for a recessed light in the ceiling of our top floor hallway.
>> Therefore the housing for the light is going in the attic/roof. The
>> housing itself includes the multi-strand wire, that I have to connect
>> the copper wire to that is fed in from the light switch.
>>
>> Right now, I have used the screw on cone shaped type connectors (I
>> forget what they're called ... merriates????) but the connection does
>> not look that good - the multi-strand wire seems to fray quite easily.
>>
>> Thx!!
>>
>
> They are generically called "wire nuts".
>


Not round here they're not. They're called "marrettes".

a

Posted by RBM on February 28, 2008, 6:54 am

> Does anyone know the best way to connect a multi-strand wire to copper
> wire?
> This is for a recessed light in the ceiling of our top floor hallway.
> Therefore the housing for the light is going in the attic/roof. The
> housing itself includes the multi-strand wire, that I have to connect
> the copper wire to that is fed in from the light switch.
>
> Right now, I have used the screw on cone shaped type connectors (I
> forget what they're called ... merriates????) but the connection does
> not look that good - the multi-strand wire seems to fray quite easily.
>
> Thx!!

I believe the French word for wire nut is merat. You twist the stranded
wires around the solid wire in a clockwise rotation then twist the wire nut
on. Be sure you are using the correct size nut for the connection



Page 1 of 5       1 2 3 > last >>
Similar ThreadsPosted
connecting Steel pipe to plastic OR copper June 25, 2007, 7:04 am
el wire rope lighting electroluminescent FLEXIBLE NEON WIRE (KPT SERIES) September 5, 2006, 5:13 pm
el wire rope lighting electroluminescent FLEXIBLE NEON WIRE (KPT SERIES) September 5, 2006, 5:14 pm
Kenmore Canister vacuum cleaner: Bypassing the diode when connecting wire to the motor July 6, 2008, 10:21 am
Connecting 16th century antenna wire to 21st century coax January 23, 2006, 9:09 pm
Re: White, Black, Green, Blue and RED lighting wire ? December 9, 2007, 10:14 pm
miles of old copper wire August 17, 2005, 7:20 am
striiping copper wire May 4, 2008, 8:18 am
Copper wire vs. roof mold October 16, 2005, 4:00 pm
Price for copper wire to sub panel? June 14, 2006, 1:31 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap