|
Posted by Oyabun on November 6, 2009, 8:07 am
On Thu, 5 Nov 2009 17:40:13 -0800 (PST), Matt
>I have a York Stellar furnace that is 16 years old. After the heat
>cycles on and off, the blower will occassionally stay running. If I
>tap the fan/limit control very lightly the metal disk unsticks,
>jiggles a bit, and then the blower shuts off. Then it may work fine
>for a few cycles, but sooner or later it will stick on again and need
>to be tapped. I assume that this is the part that needs to be
>repaired, but is it pretty easy? The fan/limit control is a
>Honeywell, so I assume I can find the model/part# and get a
>replacement or just take the old one in. I've attached a pic at
>http://img199.imageshack.us/img199/2626/img1509fo.jpg
>Thanks!
Just replace it.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>cycles on and off, the blower will occassionally stay running. If I
>tap the fan/limit control very lightly the metal disk unsticks,
>jiggles a bit, and then the blower shuts off. Then it may work fine
>for a few cycles, but sooner or later it will stick on again and need
>to be tapped. I assume that this is the part that needs to be
>repaired, but is it pretty easy? The fan/limit control is a
>Honeywell, so I assume I can find the model/part# and get a
>replacement or just take the old one in. I've attached a pic at
>http://img199.imageshack.us/img199/2626/img1509fo.jpg
>Thanks!