|
Posted by Rich256 on February 8, 2007, 6:31 pm
> FYI
> I have been reading all the post on hard starting engines.
> I had a old Toro snowpup blower that was hard to start . Solved it real
> easy with a small 3/16 hole drilled in the shroud near the intake of the
> carb
> I gave it a shot of starter fluid (ether )available at auto parts store
> and it started like a dream with out pulling out my guts out. Do not over
> use it It only takes a little and is very flammable
>
I just made a similar comment on another thread. I use spray type
carburetor cleaner - available everywhere including WalMart auto section. I
buy three for four cans at a time at COSTCO.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap