|
Home Repair - - If it ain't broken, don't fix it. Otherwise look here.
|
|
|
|
If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by rarewolf on November 11, 2006, 12:09 pm
We installed a maple hardwood floor several years ago, and picked maple
for its hardness believing even our german shepherds wouldn't be able
to scratch it. Well, several years later the floor looks like a
skating rink, and we want to consider refinishing it.
Many of the deeper scratches do appear to be into the hardwood, but it
did have 5-6 coats of finish (type unknown). Is there a hardwood
finish that would be particularly hard enough to resist dog claws?
TIA :o)
|

| |
Posted by hallerb@aol.com on November 11, 2006, 2:14 pm
rarewolf wrote:
> We installed a maple hardwood floor several years ago, and picked maple
> for its hardness believing even our german shepherds wouldn't be able
> to scratch it. Well, several years later the floor looks like a
> skating rink, and we want to consider refinishing it.
>
> Many of the deeper scratches do appear to be into the hardwood, but it
> did have 5-6 coats of finish (type unknown). Is there a hardwood
> finish that would be particularly hard enough to resist dog claws?
>
> TIA :o)
is this the fake hardwood laminate floor?
i understand the hardness is largely from the coating, fake floor is
supposed to have the best.
my wife wanted to do the fake stuff and i refused we have 4 dogs, i
believe their sharp nails would scratch it.
to scratch the wood the coating must already be worn thru
|
|
Posted by Proctologically Violated©® on November 12, 2006, 12:15 pm
I'm certainly not an expert, but in my own floor travails, "the word" was
water-based polyurethane *with a catalyst* for hardening, that is sposed to
be very hard. 4 oz catalyst per gal poly.
Altho I must say, the really gorgeous floors I've seen were always done in
oil-based--but harder to work with.
I believe the polyurethane might be able to "fill" the scratches, so they
are not so visible, sorta like wax on plastic--really on optical effect, but
sure beats sanding. Maybe a combination of sanding/filling w/ poly.
5-6 coats of finish is pretty good, more than most, but I've heard from some
floor guys that 10 coats--and more!-- is not unreasonable.
Maybe instead of coats, they should start talking fractions of an inch!
But for animals claws, etc, you might want to search under "clear epoxies"
and "floor", and see what that yields. Proly super super expensive, if it
exists.
--
------
Mr. P.V.'d (formerly Droll Troll), Yonkers, NY
Stop Corruption in Congress & Send the Ultimate Message:
Absolutely Vote, but NOT for a Democrat or a Republican.
Ending Corruption in Congress is the *Single Best Way*
to Materially Improve Your Family's Life.
The Solution is so simple--and inexpensive!
entropic3.14decay at optonline2.718 dot net; remove pi and e to reply--ie,
all d'numbuhs
> We installed a maple hardwood floor several years ago, and picked maple
> for its hardness believing even our german shepherds wouldn't be able
> to scratch it. Well, several years later the floor looks like a
> skating rink, and we want to consider refinishing it.
>
> Many of the deeper scratches do appear to be into the hardwood, but it
> did have 5-6 coats of finish (type unknown). Is there a hardwood
> finish that would be particularly hard enough to resist dog claws?
>
> TIA :o)
>
>
|
| Similar Threads | Posted | | Floor finish | April 30, 2007, 9:03 am |
| Finish for new pine floor | October 19, 2005, 10:42 am |
| Damaged Floor Finish | September 15, 2005, 2:21 pm |
| hardwood floor finish | December 20, 2005, 9:31 pm |
| Shellac Floor finish? | April 10, 2006, 1:44 pm |
| wood floor finish? | October 14, 2006, 4:12 pm |
| Garage Floor Finish | March 6, 2007, 8:29 pm |
| Toe kick: Paint or finish like floor? | April 23, 2006, 7:27 pm |
| Adding a coat of finish to hardwood floor | July 17, 2006, 12:57 pm |
| Holloway House Quick Shine Floor Finish | May 18, 2006, 5:23 pm |
|
|
|