If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by charley on February 12, 2007, 8:48 am
i need to replace quite a bit of wood trim on my house, it is painted
cedar now. eave trim will be cedar for continuity, but if i replace
an entire window box, should i do it all in cedar or hardiplank? its
cost vs ease of installation, i will do it all myself. it just seems
easier to cut and nail cedar.
any input? i plan to sell in 2 years.....
david
www.dcgphotography.com
|
|
Posted by Big_Jake on February 12, 2007, 9:44 am
Hardiplank is heavy, and is very difficult to both cut and nail. It
is probably more expensive than cedar too. However, a quality paint
job might last 20 years on hardiplank. If you are selling soon, you
are probably better off with cedar.
JK
> i need to replace quite a bit of wood trim on my house, it is painted
> cedar now. eave trim will be cedar for continuity, but if i replace
> an entire window box, should i do it all in cedar or hardiplank? its
> cost vs ease of installation, i will do it all myself. it just seems
> easier to cut and nail cedar.
>
> any input? i plan to sell in 2 years.....
>
> davidwww.dcgphotography.com
|
|
Posted by Art on February 12, 2007, 12:11 pm
There are many thicknesses of cedar siding. I had thin crap on my previous
house and it was worthless. When comparing pricing make sure you are
looking at a high quality cedar material.
>i need to replace quite a bit of wood trim on my house, it is painted
> cedar now. eave trim will be cedar for continuity, but if i replace
> an entire window box, should i do it all in cedar or hardiplank? its
> cost vs ease of installation, i will do it all myself. it just seems
> easier to cut and nail cedar.
>
> any input? i plan to sell in 2 years.....
>
>
> david
> www.dcgphotography.com
>
|
|
Posted by on February 12, 2007, 6:31 pm
> i need to replace quite a bit of wood trim on my house, it is painted
> cedar now. eave trim will be cedar for continuity, but if i replace
> an entire window box, should i do it all in cedar or hardiplank? its
> cost vs ease of installation, i will do it all myself. it just seems
> easier to cut and nail cedar.
>
> any input? i plan to sell in 2 years.....
>
> davidwww.dcgphotography.com
I've used hardiplank and must say I really didn't too much of it.
And was told by the lads at the lumber yard that it is not as
waterproof as the manufacturer would have you believe.
I would stick to the cedar and remember to prime both sides.
It really does make a difference in how long it last and how long
paint stays on.
|
|
Posted by Steve on February 15, 2007, 12:45 am
> i need to replace quite a bit of wood trim on my house, it is painted
> cedar now. eave trim will be cedar for continuity, but if i replace
> an entire window box, should i do it all in cedar or hardiplank? its
> cost vs ease of installation, i will do it all myself. it just seems
> easier to cut and nail cedar.
>
> any input? i plan to sell in 2 years.....
I've put up a ton of Hardiplank. It's easy to handle, cuts nicely, nails
well, and takes paint wonderfully. It won't rot or be eaten by termites
-- it's made out of cement and fiberglass.
They make a special tool, like powered scissors, to cut
Hardiplank/Hardiboard, but you can cut it with a circular saw just as
well. Special blades are available, or you can just turn a regualar wood
blade around backwards. You'll get a lot of dust (it's made out of cement
and fiberglass), but that's a small inconvenience.
|
| Similar Threads | Posted | | Broken hardiplank | October 7, 2006, 10:07 pm |
| Found easy way to cut hardiplank.. | February 27, 2006, 6:13 pm |
| Hardiplank siding installation | August 18, 2006, 5:49 pm |
| Question about Cedar | August 13, 2005, 8:37 am |
| CEDAR SIDING | March 18, 2006, 9:02 am |
| cedar and sealants | April 7, 2006, 3:30 pm |
| Cedar Fading in the sun | April 13, 2006, 4:22 pm |
| Cedar siding | October 24, 2006, 1:51 pm |
| Cedar Wood | March 31, 2008, 10:43 am |
| Cedar Wood | May 5, 2008, 9:51 am |
|
|