|
Posted by Mike_in_SD on August 7, 2006, 10:52 am
maradcliff@UNLISTED.com wrote in <ue5ed2hmrnu6855ok99ff0j8549mo5gggj@
4ax.com>:
>On Mon, 07 Aug 2006 06:50:23 GMT, Idontthinkso@nospam.com (Mike_in_SD)
>wrote:
>>rbm2(remove this)@optonline.net (RBM) wrote in
>>>If the wiring is accessible to reverse the motor, there should be a
>>>diagram on the motor or inside the splice box to show you which wires to
>>>switch
>>thanks .. ill look
>>mike
>If there is a shaft on both ends? Just use the other end.
>Unfortunately thats seldom an option.
no .. its on my drill press
|
> 110v capacitor start ac motor ..
> whats the simplist way to do this ..
> tia
> mike