Home Page link

insulation

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 3       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
insulation caledon 08-21-2005
---> Re: insulation twice_redeemed@...08-22-2005
|--> Re: insulation Joseph Meehan08-22-2005
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on August 22, 2005, 4:10 am


Look at the venting & HVAC arrangements.
Check the Building Science Corporation web site.
I have a house from the 1840s in hot humid climate and insulated the
roof rather than the ceiling.
This has worked o.k. for 25 years.
TB



Posted by Bill Waller on August 22, 2005, 7:18 am



>Hi, I need advice on insulating my old house (105 yrs. old). There is
>virtually NO insulation in the attic at all. Between the joists you
>can see the lathe and plaster. There are scatterings of insulation here
>and there that is basically usless and likely should be removed (since
>critters have used it as a urinal).
>
>My question is, if I put down batts of insulation, should I FIRST be
>putting plastic down as a vapour barrier. I think I read that some
>types of insulation comes with a built in vapour barrier on one side.

You can purchase insulation that is unfaced (no vapor barrier), faced on one
side, or faced on both sides. If you buy the single faced insulation, there
should not be a need to put down a separate barrier. I have never used the
double faced in any application, but would be wary of it in an attic where you
need the insulation to be able to "breathe."
>
>I thought that I would remove the old rotted insulation that is
>currently there, put in batts of fresh insulation then blow in more on
>top. Any suggestions

Removing the old insulation is probably a good idea. One never knows what has
lived in it, especially over a hundred year span.

If you place bats into the troughs between the ceiling joists, be sure to place
the barrier side down. Do not pour insulation over the bat material. Insulation
depends upon trapped air to provide the heat transfer stoppage between two
spaces. Placing a poured material on top of the (I am assuming fiberglass) will
crush the fiberglass and reduce its designed air volume and thereby reduce the
efficiency of the material.

If you really want to add to the "R" value of the insulation, and don;'t mind a
lot of work, you can cut slabs of Styrofoam insulation to fit be between the
joists and lay that in before putting in the roll material. In this scenario,
the independent vapor barrier would be advisable and unfaced bat material on
the top. Again, do not put anything on top of the Fiberglas that would crush it
down.



Bill Waller
New Eagle, PA

wsw1856@comcast.net


Posted by on August 22, 2005, 7:22 am


Singe sided bats. If there really isnt too much of the old stuff
remove it. If there are animal dropping etc, take care of that first.

Then seal up and electical holes that you may have. What I mean
by that is high hat or outlet drops that are in the ceiling.

If you do have highhats up there make sure that they are rated
to be up against insulation. If not, the need to be simply boxed
in. (no need for any fires up there)

Do NOT insulate the roof!!! This can create an icedam situation.
This may work for warm weather areas, but you are in canada.
If your into doing all of this, go to one of your local home centers
and simply ask for help.

One thing that I certainly recommend if you do this is that you
get decent dust masks (respirators) when playing with this
stuff. No need killing yourself while saving some money!
Long clothing also helps releive some of the itch factor.

Tom



Posted by twice_redeemed@yahoo.com on August 22, 2005, 10:11 am


I had an old house with no insulation in the attic. Had a guy come out
and blow in insulation, it worked well.



Posted by on August 22, 2005, 10:34 am


I would measure the distance between the joists in several places. If
it's anything like mine, then you'll want to use the blown in variety
to to inconstincies on the spacing.



Page 2 of 3       < 1 2 3 > last >>
Similar ThreadsPosted
Alternatives to Frost King Insulation or Preferred Insulation for Door Frames, Etc February 4, 2007, 1:49 pm
Temporaire water into insulation could affect insulation and floor rafters? July 10, 2006, 11:03 am
Insulation question (greenboard in bathroom, kraft face insulation, etc.) June 3, 2008, 2:44 pm
Insulation on top of wool insulation July 27, 2007, 12:01 am
Insulation October 30, 2005, 8:15 am
More insulation January 16, 2006, 1:03 pm
"R" for insulation???? July 11, 2006, 11:26 pm
insulation August 12, 2006, 3:26 pm
Insulation September 22, 2006, 11:09 pm
insulation November 25, 2006, 10:53 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap