|
Posted by Sev on July 13, 2007, 11:04 am
> I am extending my irrigation system and have built a 3 valve manifold system
> using Toro 1" solonoid controllers. All the valves work well when I turn
> them on. I've connected the middle valve ( 2 ) to an irrigation system and
> in testing it found that valve to the left "leaks" only when #2 is turned
> on. It does not leak when #2 is off.
> Also I have only wired valve #2 so valves #1 and #3 are not connected to
> electricity.
> Any ideas why valve three would be leaking only when valve 2 is activated?
> Thanks
> JD
Just a thought- some things do leak more at low pressure than at
high.. Possibly some dirt got in the valve, but it is forced closed
at full pressure. Leaks, however, when the other valve relieves some
of that pressure. I understand this is solenoid valve, but water
pressure may contribute to the seal.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap