Home Page link

metal roof and leaks? using tape to fix? Eternabond brand tape

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
metal roof and leaks? using tape to fix? Eternabond brand tape davidlaska 09-07-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Don Young on September 8, 2006, 10:03 pm

>
> Don Young wrote:
>> >I have a metal roof made with used metal sheet (2x9 feet) and there are
>> > holes from previous fasteners. I tried silicon, tarbased stuff, butyle
>> > but examining then weeks later I felt that it will not do the job when
>> > the rains come. I bought a role of 4 inch by 50 eternabond tape and
>> > cut pieces for the holes. It seems to stick very well and has a UV
>> > backing. It is marketed for this purpose. Has anyone had experience
>> > use this product of mental? ( Like all products, the surface must be
>> > clean, free of and so on)
>> >
>> Yours may not be, but metal roofing is normally applied over a waterproof
>> underlayment of some sort with some means of ventilation under the metal.
>> If
>> so, any small amount of water under the metal will simply evaporate.
>> Metal
>> roofing can get a lot of water underneath just from condensation.
>>
>> Don Young
> metal sheet laid over 1 x 6 planks space 6 inches apart, very old house
> for california (ww 2). original roof was singles only, nothing else,
> just nailed to 1 x 6 which were removed for metal.
>
Old houses, sheds, and barns were normally built without any solid decking
under the metal roofing sheets or wooden shingles. Some rain water and
condensation would drip at times but the ventilation was enough for it to
dry out without causing any problems. You can try the tape to seal the
holes. Another possibility would be to use sheet metal screws with rubber
gaskets or some kind of sealer. The main hazard to any kind of sealing
material is the sun. Expect some drips from condensation and wind driven
rain at times.

Don Young



Radiant Heat 468x60
Posted by davidlaska on September 10, 2006, 9:09 pm

Don Young wrote:
> >
> > Don Young wrote:
> >> >I have a metal roof made with used metal sheet (2x9 feet) and there are
> >> > holes from previous fasteners. I tried silicon, tarbased stuff, butyle
> >> > but examining then weeks later I felt that it will not do the job when
> >> > the rains come. I bought a role of 4 inch by 50 eternabond tape and
> >> > cut pieces for the holes. It seems to stick very well and has a UV
> >> > backing. It is marketed for this purpose. Has anyone had experience
> >> > use this product of mental? ( Like all products, the surface must be
> >> > clean, free of and so on)
> >> >
> >> Yours may not be, but metal roofing is normally applied over a waterproof
> >> underlayment of some sort with some means of ventilation under the metal.
> >> If
> >> so, any small amount of water under the metal will simply evaporate.
> >> Metal
> >> roofing can get a lot of water underneath just from condensation.
> >>
> >> Don Young
> > metal sheet laid over 1 x 6 planks space 6 inches apart, very old house
> > for california (ww 2). original roof was singles only, nothing else,
> > just nailed to 1 x 6 which were removed for metal.
> >
> Old houses, sheds, and barns were normally built without any solid decking
> under the metal roofing sheets or wooden shingles. Some rain water and
> condensation would drip at times but the ventilation was enough for it to
> dry out without causing any problems. You can try the tape to seal the
> holes. Another possibility would be to use sheet metal screws with rubber
> gaskets or some kind of sealer. The main hazard to any kind of sealing
> material is the sun. Expect some drips from condensation and wind driven
> rain at times.
>
> Don Young
Sun pretty much can be harsh on everything. The tape come with a
separate but attacked laye r of UV resistant material (It has the look
and feel of the plastic protector under the cover of scanners and
copying machines. They come in three colors, white grey and black. I
figured the white would reflect more harmful rays than black and stay a
lot cooler.


Page 2 of 2       << first < 1 2
Similar ThreadsPosted
Duck tape: is there a brand that doesn't leave sticky residue [or is there an alternative]? October 20, 2005, 3:42 am
Tuck Tape? Vapor barrier tape? September 23, 2007, 11:09 am
metal screws?, replacement for today's crap duc tape? June 12, 2006, 9:08 pm
teflon tape vs pipe tape ??? November 3, 2005, 8:39 am
How to tape up? April 9, 2008, 9:39 am
Duct Tape, or what? December 10, 2005, 3:42 pm
Light Tape - ever used it? January 10, 2006, 2:42 pm
drywall tape February 8, 2006, 2:47 pm
Fireproof tape? February 13, 2006, 10:27 pm
Bad mud & tape job on ceiling need help! February 28, 2006, 6:38 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap