Home Page link

radial arm saw craftsman 113.29500

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
radial arm saw craftsman 113.29500 Jerry Neal 07-25-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Jerry Neal on July 25, 2007, 9:29 pm
just bought an old ras and everything worked well so i thought i
would check all gears and seals and all tht stuff looked brand new
but i cant get the arm adjusted to swivel its frustrating any ideas
Thanks


AppliancePartsPros.com, Inc.
Posted by Doug Miller on July 26, 2007, 7:43 am
>just bought an old ras and everything worked well so i thought i
>would check all gears and seals and all tht stuff looked brand new
>but i cant get the arm adjusted to swivel its frustrating any ideas

Several ideas:

First, a better description of the problem you're having would be helpful. Do
you mean you can't get the arm to swing side-to-side at all, or do you mean
you're having problems with adjusting it to the proper position when you do
swing it?

Second, posting in rec.woodworking is more likely to get you good answers than
posting here.

Third, if you learn to use capitalization and punctuation properly, so your
posts are easier to read, you're more likely to get help.

--
Regards,
Doug Miller (alphageek at milmac dot com)

It's time to throw all their damned tea in the harbor again.

Posted by BillGill on July 26, 2007, 8:58 am
Jerry Neal wrote:
> just bought an old ras and everything worked well so i thought i
> would check all gears and seals and all tht stuff looked brand new
> but i cant get the arm adjusted to swivel its frustrating any ideas
> Thanks
>
Check the Sears site. They may have a manual available
for download.

Bill Gill

Posted by John D on July 29, 2007, 3:06 am
http://www.ridgid.com/Tools/Literature-Search

search here for radial arm saw. Rigid has one that's similar to some sears



Posted by Joseph Meehan on July 26, 2007, 12:47 pm
Jerry Neal wrote:
> just bought an old ras and everything worked well so i thought i
> would check all gears and seals and all tht stuff looked brand new
> but i cant get the arm adjusted to swivel its frustrating any ideas
> Thanks

Do you have the owner's manual? That should have instructions in it.
If you don't have a manual start by checking with Sears. They may have one
available for down-load. I have an older model (late 1960's early 70's) and
if you can't find a manual, reply to this message and I will check what
model I have. My book covers 9,10 & 12 inch models. BTW I also was not able
to figure out what your problem is from your description. With a better
description I might be able to help.


--
Joseph Meehan

Dia 's Muire duit




Similar ThreadsPosted
Radical upside down Craftsman 10" Radial Sled Saw / Upside down table saw April 18, 2008, 8:16 am
Radial Arm Saw September 11, 2005, 10:12 am
Radial Arm Saw Motor December 26, 2007, 11:15 am
GFCI outlet for radial arm saw February 25, 2006, 1:16 am
Anyone Please: electrical - re: 35 Xmas light strings & and radial arm sawŠ April 12, 2006, 2:24 am
Craftsman 8.5 hp snowblower April 8, 2007, 5:10 pm
Craftsman DYT4000 help May 12, 2007, 5:59 pm
Craftsman Warranty May 24, 2008, 11:12 pm
$50 craftsman reciprocating saw -- opinion? November 12, 2005, 6:47 am
For the anti-Craftsman crowd... :) June 18, 2005, 11:52 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap