r.o. faucet hole

	r.o. faucet hole

Home| Search | About

Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

r.o. faucet hole

Tom Fletcher

05-04-2008

evodawg

Red Green

C & E

If you were Registered and logged in, you could reply and use other advanced thread options

Posted by Tom Fletcher on May 4, 2008, 2:42 pm

I have a customer who has a 1 7/8 inch hole
in her sink, and I want to put a faucet in this
hole...... but the hole is waaaaay to big...
any good ideas on using some sort of ring
to fill the gap..... its a brush nickel faucet...

Posted by evodawg on May 4, 2008, 4:14 pm

Tom Fletcher wrote:

> I have a customer who has a 1 7/8 inch hole

> in her sink, and I want to put a faucet in this

> hole...... but the hole is waaaaay to big...

> any good ideas on using some sort of ring

> to fill the gap..... its a brush nickel faucet...

I think they make a oversize ring for this. I have tossed some away when
doing faucet installs. Don't remember the make. You might contact
manufacture of the faucet and see what they say.
--
"You can lead them to LINUX
but you can't make them THINK"
Running Mandriva release 2008.0 free-i586 using KDE on i586

Posted by Red Green on May 4, 2008, 7:51 pm

> I have a customer who has a 1 7/8 inch hole

> in her sink, and I want to put a faucet in this

> hole...... but the hole is waaaaay to big...

> any good ideas on using some sort of ring

> to fill the gap..... its a brush nickel faucet...

Duct tape is kinda brush nickel...

Posted by C & E on May 4, 2008, 8:29 pm

>I have a customer who has a 1 7/8 inch hole

> in her sink, and I want to put a faucet in this

> hole...... but the hole is waaaaay to big...

> any good ideas on using some sort of ring

> to fill the gap..... its a brush nickel faucet...

Contact your local professional supplier - sometimes they are a closed
job-shop (contractors only) - they should have the answer. Another ploy
would be to call them and ask. They may not ask if you are a
pro-contractor... then again, you just might be. Can't tell so no offense
intended either way. Good luck.

Similar Threads	Posted
Will single hole faucet fit widespread center hole?	March 14, 2007, 2:10 am
What hole size for installing a sink faucet?	March 18, 2008, 9:11 pm
hole in sink	October 3, 2005, 11:48 am
Hole in Ducting.	June 21, 2005, 10:03 pm
How many wires in a hole	June 30, 2005, 3:21 pm
HOLE IN ROOF	September 7, 2006, 11:22 pm
How to patch this hole	September 20, 2006, 3:27 pm
Digging a hole	March 14, 2007, 3:21 am
I cant find the hole	April 3, 2007, 2:00 am
Use what to seal this hole	October 21, 2007, 4:41 pm

XML Sitemap