|
Posted by Dick Adams on June 3, 2006, 11:14 am
>> Boatman wrote:
>>> water seems to spray from these in a cone shape and I think most of
>>> the water goes to the perimeter of the circle rather than spread
>>> evenly throughout the circle. The grass growth seems to bear this
>> Sounds like the head is partially clogged - this sometimes happens with
>> a piece of grit or sand gets by the internal filter.
>>
>> Try cleaning the outlet face with a very small screwdriver.
> Does that mean that this type of head is normally supposed to
> spread evenly throughout the circle?
Yes.
> I have three of them in the zone and they all behave the same way!!
Clean all three of them. I used some paperclips.
Dick
|