|
Posted by Mack the Knife on April 28, 2008, 8:43 pm
Mark Sparge wrote:
>> Mikepier wrote:
>>> Greetings. I would like to refinish my 6 panel oak front door. It
>>> currently is stained and has polyurethane or varnish on top that has
>>> faded. What would be the best way to strip it, chemicals or heat gun?
>> Hi. New here, first post.
>>
>> I have recently just done exactly that, refinished a six panel hardwood
>> door. Mahogany, not oak. I have tried heat guns in the past, two in
>> fact, one flame, one very hot air, but they were not at all efficient. I
>> ended up using a gel type commercial stripping agent and a very high
>> pressure, low flow water blaster with a knife attachment. It took only
>> moments to strip back to a finish that looked as though it had just been
>> freshly sanded. (You have to be careful doing this with softwoods, it
>> can literally rip pine apart.) I then liberally applied Teak Oil and let
>> it dry with the aid of my workshop air conditioner on "extract
>> moisture", not on cooling. It brought the door back to a new timber
>> condition. The water blasting is remarkably effective and as it is VERY
>> quick, the timber doesn't get saturated. No warping or cracking problems
>> etc. I have now stained, filled and Marine Two Pack finished it. Now all
>> I have to do is figure out where I want to use it. It was a find at a
>> rubbish disposal centre. Many badly applied coats of both oil based and
>> poly clear finishes made it look pretty crappy, then I noticed that it
>> was Mahogany. Too good to leave there, but not really needed on any
>> current project. I guess I'll keep it in the "one day..." collection for
>> a while. (My wife wants to nuke the "one day..." collection. :) )
>>
>> Mack
>
>
------------------------------------------------------------------------------------------
>
> Mack -- do you have any links for your water blaster -- manufacturer,
> etc.??
>
Hi Mark.
I use a device made by Karcher, it was initially used for cleaning heavy
trucks. I use a tip that forces the spray into a horizontal spray, a
"knife" edge. It is sharp enough to actually cut the skin if you are
unfortunate enough to get a hand or foot in the way. Very useful gadget,
I use it for cleaning cement, stripping Terracotta roof tiles back to a
new finish, cleaning the family cars (on a reduced pressure), great for
alloy wheels, and even washing the dog (on a MUCH reduced pressure). Dog
loves it.
It uses about five or six litres a minute when fed from a twenty litre
bucket or container and it seldom takes more than a minute or two to
strip something the size of a door. As mentioned elsewhere, you can add
white spirit and Flaxseed oil to the water source if needed. It is
capable of stripping paint from brickwork etc., without chemicals, just
the high pressure alone.
Regards
Mack
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap