If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on August 7, 2006, 12:42 pm
I have some horizontal flourescent light fixtures that have sockets to
accept horizontal bulbs with 2 pins at each end. in trying to replace
the bulbs, the bulb pins are stuck in the sockets.
would it be useful, and also safe, to spray wd-40 into the sockets
before inserting the bulbs?
best, Aaron
|
|
Posted by Jim McLaughlin on August 7, 2006, 1:10 pm
Head to your local auto supply place and get some of te dielectric
grease(white sff in a smal tube or a vinyl pouch) that is used for spark
plug boots and bulb connections in cars. One tube will last you forever,
its a good lubricant and conductor.
Remember that WD 40 is essentially kerosene with perfumes. Eventually it
will gum up, attract dirt and dust, and possibly interfere with good
electrical contact.
--
Jim McLaughlin
Reply address is deliberately munged.
If you really need to reply directly, try:
jimdotmclaughlinatcomcastdotcom
And you know it is a dotnet not a dotcom
address.
> I have some horizontal flourescent light fixtures that have sockets to
> accept horizontal bulbs with 2 pins at each end. in trying to replace
> the bulbs, the bulb pins are stuck in the sockets.
>
> would it be useful, and also safe, to spray wd-40 into the sockets
> before inserting the bulbs?
>
> best, Aaron
>
|
|
Posted by Steve Kraus on August 7, 2006, 11:49 pm
Jim McLaughlin wrote:
> One tube will last you forever,
> its a good lubricant and conductor.
Conductor of heat but an insulator electrically.
|
|
Posted by George on August 11, 2006, 9:06 am
Steve Kraus wrote:
> Jim McLaughlin wrote:
>
>>One tube will last you forever,
>>its a good lubricant and conductor.
>
>
> Conductor of heat but an insulator electrically.
Yes, and perfect for the described use.
|
|
Posted by Joseph Meehan on August 7, 2006, 3:14 pm
aaronep@pacbell.net wrote:
> I have some horizontal flourescent light fixtures that have sockets to
> accept horizontal bulbs with 2 pins at each end. in trying to
> replace the bulbs, the bulb pins are stuck in the sockets.
>
> would it be useful, and also safe, to spray wd-40 into the sockets
> before inserting the bulbs?
>
> best, Aaron
Not WD-40 (WD=Water Displacement). Use a dielectric grease. You can
find small qualities at an auto parts store. It is cheap enough.
--
Joseph Meehan
Dia duit
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Fluorescent fixture won't light | September 6, 2005, 2:16 pm |
| testing fluorescent light fixture | January 13, 2007, 1:45 pm |
| Trouble with 4' 3-T8 fluorescent light fixture | October 12, 2007, 5:25 pm |
| Light fixture wattage limit and compact fluorescent bulbs | December 28, 2005, 10:49 pm |
| fluorescent fixture | January 15, 2006, 7:09 pm |
| 8' T8 fluorescent fixture | November 13, 2006, 6:47 pm |
| Fluorescent Fixture Rewire? | July 26, 2005, 12:07 pm |
| Wire for fluorescent fixture | September 6, 2005, 5:28 am |
| Re: GE/Jasco 55w 2D fluorescent fixture | June 15, 2005, 6:53 pm |
| Re: GE/Jasco 55w 2D fluorescent fixture | June 15, 2005, 7:07 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap