If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by randee on November 23, 2006, 12:19 am
I have a whirlpool accubake self cleaning oven. I cleaned it today
(for Thanksgiving), but it is now stuck in the locked position. There
is no diplay panel showing, and nothing responds. We made sure we
didn't pop a breaker, etc. Any FAST ideas?
|
 
| |
Posted by Tom G on November 23, 2006, 2:30 am
>I have a whirlpool accubake self cleaning oven. I cleaned it today
> (for Thanksgiving), but it is now stuck in the locked position. There
> is no diplay panel showing, and nothing responds. We made sure we
> didn't pop a breaker, etc. Any FAST ideas?
>
Try flipping the breaker off, wait a couple of minutes and then flip it back
on. Might work, can't hurt.
Tom G
|
|
Posted by on November 23, 2006, 6:42 am
randee wrote:
> I have a whirlpool accubake self cleaning oven. I cleaned it today
> (for Thanksgiving), but it is now stuck in the locked position. There
> is no diplay panel showing, and nothing responds. We made sure we
> didn't pop a breaker, etc. Any FAST ideas?
My self-cleaning oven stays locked until the temperature comes down to
some preset level, even though the outside is only slightly warm, it
stays locked for a while.. You may just need to wait.
Hope this helps -- Terry
|
|
Posted by Howard on November 23, 2006, 8:14 am
Call Whirlpool at 1 800 253 1301, think its open 24/7
On Nov 23, 6:42 am, prfes...@hotmail.com wrote:
> randee wrote:
> > I have a whirlpool accubake self cleaning oven. I cleaned it today
> > (for Thanksgiving), but it is now stuck in the locked position. There
> > is no diplay panel showing, and nothing responds. We made sure we
> > didn't pop a breaker, etc. Any FAST ideas?My self-cleaning oven stays
locked until the temperature comes down to
> some preset level, even though the outside is only slightly warm, it
> stays locked for a while.. You may just need to wait.
>
> Hope this helps -- Terry
|
|
Posted by Steve B on November 23, 2006, 12:34 pm
>I have a whirlpool accubake self cleaning oven. I cleaned it today
> (for Thanksgiving), but it is now stuck in the locked position. There
> is no diplay panel showing, and nothing responds. We made sure we
> didn't pop a breaker, etc. Any FAST ideas?
>
I had EXACTLY the same problem. I went to the parts store and got a
replacement assembly that included the drive motor and two switches. $62
total. Parts # 9760888. Take the model number (lower right hand side of
inside edge of oven with door open) with you, and if possible, the old part.
Write down on the cabinet the way you take off the wires, using their
colors. There are two small screws that hold the strips along side the
oven. When you take those off, there are two screws that hold the oven to
the wall. Unplug it and pull it out. Take off the top cover panel to get
to the motor assembly.
Now, this is assuming your oven is like mine. In the meantime, you can take
a fork, pull the door out a little, and insert the fork in and push from
right to left to open the door. You might have to poke around.
This is a job any DIYer can do. They wanted $350 to fix mine!
Steve
|
| Similar Threads | Posted | | Oven door locked open - Help! | May 7, 2006, 3:54 pm |
| Locked out scenario | November 24, 2006, 6:48 pm |
| Swimming pool chlorine 'locked'? | May 17, 2008, 9:08 am |
| Deadbolt Stuck in Locked Position | October 26, 2008, 6:58 pm |
| Re: Kenmore oven, oven/clock lights stay on. | June 17, 2006, 2:17 am |
| Husky tool chest bought with locked/broken drawers? | February 11, 2006, 9:45 am |
| GE oven lower bake element burned thru replaced element no power to oven | April 12, 2006, 3:26 pm |
| Gas Oven | May 8, 2006, 7:02 am |
| Need help with gas oven. | January 19, 2007, 10:23 am |
| oven for lab use | May 15, 2007, 2:15 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap