Home Repair

Frameless Shower Glass - to miter or not to miter

Thu, 15 May 2008 23:44:47 -0400

Hi, I have two competing contractors to install shower glass. One suggest mitering the corner where two panels of glass meet at the 90 degree angle. The other says that its not a good idea because it wont look good. What do you think Thanks ...The post does not have replies yet. Start the discussion here

can someone recommend a dishwasher?

Thu, 15 May 2008 19:38:31 -0400

subject says all... trying to do a little googling in case my current dishwasher (which I loathe, because its a cheap flimsy POS) cant be fixed, and all I find is stuff like this: http://fixitnow.com/wp/2007/06/11/anygooddishwasherstoday/ ...... The post has 4 replies so far. Read more and discuss here

Gas stone safety knobs?

Thu, 15 May 2008 19:33:13 -0400

Hi all, I didnt realize until recently that it seems that most (if not all) gas stoves have their knobs located on the front of the stove, in easy reach of children. Does anyone know of any device or trick to lock the knobs down so children can...... The post has 1 replies so far. Read more and discuss here

Anyone have experience w/Harbor Freight sandblaste...

Thu, 15 May 2008 19:28:01 -0400

Have a potential sandblasting job (removing peeled paint from below a steel & concrete staircase, fairly large area), and I suggested to my client that we might use either one of these Harbor Freight sandblasters with a rented compressor:* ht...... The post has 9 replies so far. Read more and discuss here

They're not really DTV converters !

Thu, 15 May 2008 19:10:13 -0400

These boxes that the government is giving us 40 coupons for supposedly DTV converters are not really DTV converters Yes, they do convert a digital tv signal to analog, but at what price. The price is actually your privacy. What they dont tell ...... The post has 12 replies so far. Read more and discuss here

credit card

Thu, 15 May 2008 18:11:15 -0400

http://geocities.com/fixedratecreditcard http://geocities.com/mortgagesoftware1 http://geocities.com/hostingmanagedweb http://geocities.com/compareonlinetrading http://geocities.com/helpdesksoftware The post does not have replies yet. Start the discussion here

Mixed messages

Thu, 15 May 2008 15:43:42 -0400

I am a carpenter. Not a contractor. Ive offered to help a friend re do her living room floors and kitchen. I have a knack for making things look nice without spending a lot of money..I have a good nose for bargains, a good eye for detail, etc. ...... The post has 12 replies so far. Read more and discuss here

Short Neck PAR30 CFL ?

Thu, 15 May 2008 12:18:41 -0400

Im moving to a lot of CFLs. I would like to find a CFL replacement for a PAR30 short neck bulb. Has anyone seen one I tried Google, but didnt see anything. Thanks Al The post does not have replies yet. Start the discussion here

###EARN 1000$ PER MONTH ####

Thu, 15 May 2008 10:13:32 -0400

hello gays see this site to earn doller www.einfoweb.net.tc The post does not have replies yet. Start the discussion here

Urethaning wood entry door darkens color

Thu, 15 May 2008 09:36:56 -0400

Yesterday as a test, I wiped on a small section of Helmsman Spar urethane on my front entry door to see how it looks. This door has been recently stripped down to bare wood and I believe its mahogony. When it dried, it darkened the color of the wood ...... The post has 14 replies so far. Read more and discuss here

The Wisdom in Islam

Thu, 15 May 2008 08:14:53 -0400

Khalid ibn El Waleed (RA) narrated the following hadith: A Bedouin came one day to the Prophet (SAW) and said to him, "0, Messenger of Allah Ive come to ask you a few questions about the affairs of this Life and the Here After." Ask what you wis...... The post has 2 replies so far. Read more and discuss here

Oil primer over latex paint?

Thu, 15 May 2008 07:51:01 -0400

Ive just bought a house thats about 85 years old, and I have just sanded, pressure washed, and TSPed the exterior, in that order. I am now ready to prime the house. The problem is, some of the cedar siding has been replaced recently, and the e...... The post has 4 replies so far. Read more and discuss here

Supply windows screen

Thu, 15 May 2008 05:32:25 -0400

NingBo MeiYa Stealth Screen Window Co.,Ltd is established in1998 and located in NINGBO,ZHEJING PROVINCE,P.R.CHINA.It is a professional company integrating screen windows research,design,production,sale with installation. We handle to a variety of alu...The post does not have replies yet. Start the discussion here

Another GFCI question; sorry!

Thu, 15 May 2008 02:23:03 -0400

Ran a three wire 12 AWG (Black, Red, White plus ground) from 20 amp DP breaker to a duplex NEMA 230 volt 15 amp outlet above a garage work bench, (concrete floor), then extended 115 volts (Black, White and ground) from it to two regular duplex 115 v...... The post has 8 replies so far. Read more and discuss here

OT: Another viewpoint on global warming

Wed, 14 May 2008 22:57:26 -0400

Ok, I know it doesnt apply to home repair, but it does affect our daily life. Remember not that many years back, all the talk was about CFCs & the hole in the ozone layer You never hear much about it anymore. Now all the talk is about the ...... The post has 8 replies so far. Read more and discuss here

electric range drip pans

Wed, 14 May 2008 22:43:59 -0400

Does anybody anywhere make stainless steel drip pans for ordinary range burners I am pretty sure the answer is no, but one can hope. Everything is either some form of chromed steel with very little heat/ corrosion resistance, or else enameled steel...... The post has 4 replies so far. Read more and discuss here

Inner-tube odor in cellar

Wed, 14 May 2008 18:03:04 -0400

Hi, In my old house, over/near the basement sink, there is a distinct, *unmistakable* odor of innertube air. It smells like theres old bicycle tires jammed up inside the wall. :) There was a leak from the shower above this area years ago, ...... The post has 12 replies so far. Read more and discuss here

When to get new water heater ?

Wed, 14 May 2008 17:14:00 -0400

I have an electric water heater...and just had laminated flooring installed. The water heater is 15 years old. Most people are saying I should get a new one very quick. Is this true I never had a problem with the thing...still running wit...... The post has 21 replies so far. Read more and discuss here

Re: What the gubamint didn't tell you about digita...

Wed, 14 May 2008 15:08:37 -0400

In article <4819ffad0201684c368faf@roadrunner.com>, FDR says... i>/i i>(5 MegaW / 1kW)*24hrs*30days3.6 million kWh per month. My cost is 16 /i i>cents a kWh (includes delivery and cost) Lets say they get a cut rate ...The post does not have replies yet. Start the discussion here

countertop

Wed, 14 May 2008 14:59:33 -0400

Do you have an opinion on what countertop material to use for a kitchen remodeling Considering quartz, granite, or formica laminate (high definition laminate). Im leaning towards quartz, but interested in other opinions. Thanks. ... The post has 11 replies so far. Read more and discuss here

Garden Hose Repair

Wed, 14 May 2008 14:38:55 -0400

I have a garden hose that has a tiny leak and sprays a fine stream of water, especially when the nozzle is shut off. Of course it is always aimed at my pants leg. The hose is in good condition otherwise, so its worth repairing. To fix this tiny ...... The post has 25 replies so far. Read more and discuss here

In-line water filter

Wed, 14 May 2008 13:58:31 -0400

I have used this type of filter before and installed them. In the house we now have it would almost take a permit to move the stupid "counter" height fridge and no room on back for anything. The water supply hose has a lagre coil of poly line inside ...... The post has 1 replies so far. Read more and discuss here

Which adhesive to re-attach sole of shoe?

Wed, 14 May 2008 13:50:32 -0400

The sole of this shoe has come apart. Its a mans outdoor shoe. http://s3.tinypic.com/f5czt0.jpg The rear part of the sole became unstuck after months and months of prising the shoe off using the heel rather than undoing the laces. Big mistak...... The post has 36 replies so far. Read more and discuss here

Lawn furniture strapping to replace a sling

Wed, 14 May 2008 13:12:43 -0400

I have a couple old Samsonite Body Glove chaise lounge chairs (5410) which originally came with full slideon slings. Replacement slings are hard to come by and expensive. So I wondered whether I could remove the old slings and install straps i...... The post has 1 replies so far. Read more and discuss here

GFCI Outlet Question ?

Wed, 14 May 2008 13:12:21 -0400

Hello, Have put in a GFCI wall outlet type of GFCI breaker in kitchen. The typical type by Leviton. Wired it as a "feedthru" configuration, in that it also controls downstream wall outlets. The refrigerator is on one of these downstream outlets....... The post has 14 replies so far. Read more and discuss here

Gas Pipe Install Question - attaching to the wall ...

Wed, 14 May 2008 12:52:25 -0400

Folks, Sorry for not so smart question, but, I am getting confused and need some good advise from pros who have done some work. I am doing Gas pile in my house. I know all those things about risks and other, so let us keep it aside. I am doing pres...... The post has 3 replies so far. Read more and discuss here

Need help with lawn mower

Wed, 14 May 2008 11:39:05 -0400

I have a 6 year old White LC210 push mower which has been terrific until now. It has a 6.0 HP B&S Quantum engine that includes a shut off key. Symptoms: mower runs for a few seconds until the prime is burned off and then stops. Background: I...... The post has 11 replies so far. Read more and discuss here

Track your mileage and gas consumption

Wed, 14 May 2008 11:09:28 -0400

Hello, Check out this great site. I liked the reports it is showing with your mileage and gas consumption statistics. http://automate.existonweb.com Its free and worth to try. Thanks, The post does not have replies yet. Start the discussion here

Need help with short in circuit

Wed, 14 May 2008 10:58:36 -0400

I have a outdoor light pole that has recently been blowing the circuit breaker when turned on. I replaced the light socket in the pole and it still does it. I isolated the wires that go out to the pole from inside and hooked a OHM meter up to the...... The post has 11 replies so far. Read more and discuss here

Window repair.

Wed, 14 May 2008 10:44:43 -0400

I have insulated windows (Anderson style) installed into a new house five years ago. I do not know the manufacturer. Like many small builders, this one has "disappeared" by changing the company name. Two of the windows have developed problems. In ...... The post has 2 replies so far. Read more and discuss here

Ng price

Wed, 14 May 2008 10:24:54 -0400

With oil at record highs what will be the Natural Gas price next winter and in several years. The post does not have replies yet. Start the discussion here

Looking for a Power Sprayer

Wed, 14 May 2008 10:01:56 -0400

I am buying a 5HP compressor soon to use for a certain project. Is there any accessory I can attach to the compressor to spray a mixture of water and soap to wash a car. I know there is such a thing as a Power Washer, but I dont need so much pr...... The post has 2 replies so far. Read more and discuss here

Can I install window air conditioner in reverse po...

Wed, 14 May 2008 07:30:59 -0400

Hello, I would need to install my existing window AC on my new house in one room. I do not plan to buy another AC this year. My question is: could I install the AC on the lead of the attic access, with the face down. In that way the exterior wou...... The post has 14 replies so far. Read more and discuss here

paint question

Wed, 14 May 2008 02:37:53 -0400

Got a device that has lots of corners, differences in materials, etc. If I masked it for painting, would be masking forever. Id like to refresh the smooth metal parts. Are there automotive paints like Imron, Acrylic, etc that will brush on OK...... The post has 2 replies so far. Read more and discuss here

Stain on Hardwood Floor

Wed, 14 May 2008 00:11:44 -0400

Hi there. Theres a dark stain on the floor. Maybe the dye in the carpet leached onto the floor when the carpet got wet. I was told its not possible to just changeout the couple of strips of flooring that are stained. That the replacement piec...... The post has 9 replies so far. Read more and discuss here

water heat - oil versus electric

Tue, 13 May 2008 23:08:44 -0400

Our 10+ year old oilfired water heater (Bock 32E) is acting buggy, so were getting it replaced. My plumber is going to replace it with a new Bock 32E, along with a new burner too. Im choking a little bit on his estimate of 1800. I know tha...... The post has 23 replies so far. Read more and discuss here

Broken icemaker in my refrig

Tue, 13 May 2008 22:30:08 -0400

I have a GE refrig that has an icemaker. For some time now Ive had probems. The water seems to leak down into the freezer compartment rather than into the cubesized freezer unit. I get ice in the recepticle tray, i.e. frozen chunks in the co...... The post has 17 replies so far. Read more and discuss here

Screwing Hardie Board

Tue, 13 May 2008 20:19:49 -0400

I put my first piece of hardie board down in my bathroom. The problem have is the screws are not going flush with the hardie board. The store said to use drywall screws. I am using a power drill to do the screwing. Its powerful enough to drill the...... The post has 7 replies so far. Read more and discuss here

electric outlet box adjustable extension ring?

Tue, 13 May 2008 19:58:01 -0400

Several web pages recommend using these to extend an outlet or switch box when wood is installed over a wall that has existing outlet boxes. The problem is, I cant find them anywhere, even online. Lowes only has them in specific depths, none of w...... The post has 15 replies so far. Read more and discuss here

New furniture !

Tue, 13 May 2008 19:38:23 -0400

Hi guys Im getting married in about a month and right now im in the midst of filling my house with all kinds of things, and all of a sudden my wife(to be) said "NO we cant have that bed, because it is made of chipboard(particle board), and that wil ...... The post has 15 replies so far. Read more and discuss here

OT: The budget according to McCain - Part I

Tue, 13 May 2008 18:18:41 -0400

McCains big promise is that he can balance the budget while extending Bushs tax cuts and adding a few of his own. He likes to leave the impression that this can be done painlessly, for example, by eliminating "wasteful" spending in the form of ea...... The post has 81 replies so far. Read more and discuss here

4-year-old Whirlpool won't Cool

Tue, 13 May 2008 17:53:00 -0400

Heres the question: who should I call to repair this thing An authorized Whirlpool repair place, right I want to get a decent deal, not be overcharged. Its a pretty new, fairly nice 1000 sidebyside, with icemaker and water through the do...... The post has 13 replies so far. Read more and discuss here

important test

Tue, 13 May 2008 17:31:29 -0400

www.selfmeter.com We offer some simple tests which let you know more about your self, and also to help you to improve and get a better happy life.. 2 test ur morals visit this site www.selfmeter.com ... The post has 1 replies so far. Read more and discuss here

Honda mower quite

Tue, 13 May 2008 15:01:54 -0400

I have a Honda HRT216SDA mower that I am having a problem with; that I hope someone can help solve. It starts fine but after about 30 seconds it quits. It seems like it runs out of gas. If I let it sit dor a miniute or two it will start again but ru...... The post has 12 replies so far. Read more and discuss here

How to vacuum coils on Kenmore refrigerator?

Tue, 13 May 2008 14:26:37 -0400

I just acquired a Kenmore Coldspot refrigerator, Mod. 71192100, Mfg date 0701 and it came without a manual. Since it is not immediately obvious to me how to access the coils (for cleaning) I wondered if someone could give me a little explanati...... The post has 1 replies so far. Read more and discuss here

Pride LiftChair Hand Control Cable

Tue, 13 May 2008 09:25:18 -0400

Re: Coiled cable for hand control Pride Chair TMR575 w/heat & massage. Due to poor design of the strain relief, my coiled cable keeps breaking at the control despite several repairs. The problem is that the strain relief is too brittle and crac...... The post has 2 replies so far. Read more and discuss here

how do you deal with 1/4 cracks in an asphalt driv...

Tue, 13 May 2008 09:21:14 -0400

I have a couple of small (but getting longer) cracks in my otherwise smooth and unblemished driveway, what is the best product to use to seal them. Im a little uneasy about just filling them with a tar sealant because the disparity in color will ma...... The post has 15 replies so far. Read more and discuss here

lawn tractor w/ bad starter?

Tue, 13 May 2008 09:07:55 -0400

I have a Murray 12hp, when I turn the key it clicks. I did the troubleshooting suggested in other threads, but the solenoid is hidden so it was difficult to short the posts. So instead, I used a heavy cable, attached one end with a spade terminal t...... The post has 19 replies so far. Read more and discuss here

Urethaning front door with no stain

Tue, 13 May 2008 06:33:36 -0400

I have finished stripping down my front door and now its time to finish it. I believe it is mahagony and I would like to keep the finish natural. I am planning on using the Minwax Helmsman Spar Urethane as a finish coat. My question is do I still nee...... The post has 3 replies so far. Read more and discuss here

OT: Would appreciate suggestions of filters for al...

Tue, 13 May 2008 04:08:11 -0400

OT: Would appreciate suggestions of filters for all the spam here in A.Home.Repair for Agent v4.2 I know it is off topic but I would appreciate suggestions for filters that might reduce all the spam here in A.H.R There is too much spam to make the...... The post has 11 replies so far. Read more and discuss here